suggest-3d-printables

Files (1)

• SKILL.md

SKILL.md (first lines)

# Suggest 3D Printables

Identify mechanical parts for the build that the user could print.

## Inputs

- Project slug → `spec.md`, `bom.json`, and the user profile (printer model, bed size, available filaments).

## Method

1. **Identify candidates** — enclosure for the PCB/breadboard, sensor mount (e.g. for outdoor weather station), battery holder, button caps, cable strain relief, panel-mount adapters for connectors.
2. **For each candidate**, decide:
   - **Existing model** — search Printables, MakerWorld, Thingiverse for a parametric model matching the parts in the BOM (e.g. "ESP32-WROOM-32 dev board enclosure", "BME280 sensor housing"). When recommending, prefer parametric / OpenSCAD / Fusion sources so the user can adjust dimensions.
   - **Custom design needed** — specify required dimensions, mounting hole pattern, wall thickness, infill recommendation, and printable orientation.
3. **Check fit against the user's printer** — bed size, max Z height, supported filaments, environmental needs (PETG/ASA for outdoor, PLA acceptable indoors).

## Output

Write `<projects_dir>/<slug>/printables.md`:

- Per part: name, purpose, source link or "custom" with full spec, recommended filament, estimated print time, supports needed.
- Notes on assembly order — does anything need to be printed *before* electrical assembly (e.g. mounts the PCB drops into)?

Mention that any external links may be stale and the user should verify before printing.

From danielrosehill/Claude-Hardware-Spec-Assembly-Plugin, MIT.

More from danielrosehill/Claude-Hardware-Spec-Assembly-Plugin