cli-anything-freecad

Files (1)

• SKILL.md

SKILL.md (first lines)

# cli-anything-freecad

Complete CLI harness for **FreeCAD** — 258 commands across 17 groups covering ALL workbenches.

## Prerequisites

FreeCAD must be installed: `freecadcmd` must be in PATH.

## Installation

```bash
pip install -e freecad/agent-harness
```

## Basic Usage

```bash
cli-anything-freecad --json <command>           # JSON output for agents
cli-anything-freecad --json -p proj.json <cmd>  # With project file
cli-anything-freecad                            # Interactive REPL
```

## Command Groups (258 commands)

### document (5) — Document management
```bash
cli-anything-freecad --json document new --name "Part" -o proj.json
cli-anything-freecad --json document new --profile print3d -o proj.json
cli-anything-freecad --json -p proj.json document info
cli-anything-freecad --json -p proj.json document save -o copy.json
cli-anything-freecad --json document profiles
```

### part (29) — 3D primitives, boolean, transforms, operations
```bash
# Primitives: box, cylinder, sphere, cone, torus, wedge, helix, spiral, thread, plane, polygon_3d
cli-anything-freecad --json -p p.json part add box -P length=20 -P width=15 -P height=5
cli-anything-freecad --json -p p.json part add cylinder -P radius=3 -P height=10 --position 10,7.5,0

# Operations
cli-anything-freecad --json -p p.json part boolean cut 0 1
cli-anything-freecad --json -p p.json part copy 0
cli-anything-freecad --json -p p.json part mirror 0 --plane XY
cli-anything-freecad --json -p p.json part scale 0 --factor 2.0
cli-anything-freecad --json -p p.json part loft --indices 0,1,2
cli-anything-freecad --json -p p.json part sweep 0 1
cli-anything-freecad --json -p p.json part revolve 0 --axis Z --angle 360
cli-anything-freecad --json -p p.json part extrude 0 --direction 0,0,1 --length 10
cli-anything-freecad --json -p p.json part fillet-3d 0 --radius 2
cli-anything-freecad --json -p p.json part thickness 0 --thickness 1
cli-anything-freecad --json -p p.json part compound --indices 0,1,2
cli-anything-freecad --json -p p.json part section 0 --plane XY
cli-anything-freecad --json -p p.json part info 0
cli-anything-freecad --json -p p.json part line-3d --start 0,0,0 --end 10,5,0
cli-anything-freecad --json -p p.json part wire --points "0,0,0;10,0,0;10,10,0"
```

### sketch (26) — 2D constrained sketching
```bash
cli-anything-freecad --json -p p.json sketch new --plane XY
cli-anything-freecad --json -p p.json sketch add-line 0 --start 0,0 --end 20,0
cli-anything-freecad --json -p p.json sketch add-circle 0 --center 10,10 --radius 5
cli-anything-freecad --json -p p.json sketch add-rect 0 --corner 0,0 --width 20 --height 15
cli-anything-freecad --json -p p.json sketch add-arc 0 --center 0,0 --radius 5
cli-anything-freecad --json -p p.json sketch add-ellipse 0 --center 0,0 --major-radius 10 --minor-radius 5
cli-anything-freecad --json -p p.json sketch add-polygon 0 --center 0,0 --sides 6 --radius 10
cli-anything-freecad --json -p p.json sketch add-bspline 0 --points "0,0;5,10;10,0;15,10"
cli-anything-freecad --json -p p.json sketch add-slot 0 --center1 0,0 --center2 10,0 --radius 2
cli-anything-freecad --json -p p.json sketch constrain 0 distance --elements 0,1 --value 10
cli-anything-freecad --json -p p.json sketch edit-element 0 0 --radius 8
cli-anything-freecad --json -p p.json sketch remove-element 0 2
cli-anything-freecad --json -p p.json sketch validate 0
cli-anything-freecad --json -p p.json sketch solve-status 0
# Constraints: coincident, horizontal, vertical, parallel, perpendicular, equal,
#   fixed, distance, angle, radius, tangent, symmetric, block, diameter,
#   point_on_object, distance_x, distance_y
```

### body (38) — PartDesign features
```bash
cli-anything-freecad --json -p p.json body new
cli-anything-freecad --json -p p.json body pad 0 0 --length 10
cli-anything-freecad --json -p p.json body pocket 0 1 --length 5
cli-anything-freecad --json -p p.json body groove 0 0 --angle 360
cli-anything-freecad --json -p p.json body fillet 0 --radius 2
cli-anything-freecad --json -p p.json body chamfer 0 --size 1.5
cli-anything-freecad --json -p p.json body revolution 0 0 --angle 360
cli-anything-freecad --json -p p.json body additive-loft 0 --sketch-indices 0,1
cli-anything-freecad --json -p p.json body additive-pipe 0 0 1
cli-anything-freecad --json -p p.json body additive-helix 0 0 --pitch 5 --height 20
cli-anything-freecad --json -p p.json body additive-box 0 -P length=10 -P width=10 -P height=10
cli-anything-freecad --json -p p.json body hole 0 0 --diameter 5 --depth 10 --threaded
cli-anything-freecad --json -p p.json body draft-feature 0 --angle 5
cli-anything-freecad --json -p p.json body thickness-feature 0 --thickness 1
cli-anything-freecad --json -p p.json body linear-pattern 0 --occurrences 5 --length 50
cli-anything-freecad --json -p p.json body polar-pattern 0 --occurrences 6 --angle 360
cli-anything-freecad --json -p p.json body mirrored 0 --plane XY
cli-anything-freecad --json -p p.json body datum-plane 0 --reference XY --offset 10
```

### material (8) — PBR materials with engineering properties
```bash
# 21 presets: steel, aluminum, copper, brass, titanium, stainless_steel, cast_iron,
#   carbon_fiber, nylon, abs, pla, petg, plastic_white, plastic_black, wood, glass,
#   rubber, gold, concrete, granite, marble
cli-anything-freecad --json -p p.json material create --preset steel
cli-anything-freecad --json -p p.json material create --preset titanium
cli-anything-freecad --json -p p.json material assign 0 0
cli-anything-freecad --json -p p.json material set 0 density 7800
cli-anything-freecad --json -p p.json material import-material mat.json
cli-anything-freecad --json -p p.json material export-material 0 --output mat.json
```

### assembly (11) — Assembly management
```bash
cli-anything-freecad --json -p p.json assembly new --name "MyAssembly"
cli-anything-freecad --json -p p.json assembly add-part 0 0
cli-anything-freecad --json -p p.json assembly constrain 0 coincident --components 0,1
cli-anything-freecad --json -p p.json assembly constrain 0 distance --components 0,1 --distance 10

From edwifiguy/era-agents-ops, MIT.

More from edwifiguy/era-agents-ops