paper-write

Files (25)

• SKILL.md
• IEEEtran.bst · templates/
• IEEEtran.cls · templates/
• aaai2026.bst · templates/
• aaai2026.sty · templates/
• aaai2026.tex · templates/
• acl.sty · templates/
• acl2026.tex · templates/
• acl_natbib.bst · templates/
• acm.bst · templates/
• acm_mm2026.tex · templates/
• acmart.cls · templates/
• cvpr.bst · templates/
• cvpr.sty · templates/
• cvpr2026.tex · templates/
• iclr2026.tex · templates/
• iclr2026_conference.bst · templates/
• iclr2026_conference.sty · templates/
• icml2026.sty · templates/
• icml2026.tex · templates/
• ieee_conference.tex · templates/
• ieee_journal.tex · templates/
• math_commands.tex · templates/
• neurips2026.tex · templates/
• neurips_2026.sty · templates/

SKILL.md (first lines)

# Paper Write: Section-by-Section LaTeX Generation

> **Before each reviewer slot**, follow [Selectable Reviewers](../shared-references/reviewer-backends.md):
> resolve invocation → `.aris/reviewer.json` → Codex default (fresh native reviewer)
> with `reviewer_route.py` through the canonical helper resolver, preserving this
> slot's tier, fresh contexts, source/image inputs and deterministic gates.
> Codex examples/pins below apply only to `backend=codex`; other routes use their
> own first-call/reply contract. Save the route and actual returned identity;
> unavailable selections are `REVIEW_UNAVAILABLE`. Classify acceptance from actual
> families/completion/scope. Forward invocation reviewer/model/effort overrides
> to reviewer-bearing children. Generation workers are unchanged.


Draft a LaTeX paper based on: **$ARGUMENTS**

## Constants

- **REVIEWER_MODEL = `gpt-6-astra`** — Model used via a secondary Codex agent for section review. For `backend=codex`, use an OpenAI model.
- **TARGET_VENUE = `ICLR`** — Default venue. Supported: `ICLR`, `NeurIPS`, `ICML`, `CVPR` (also ICCV/ECCV), `ACL` (also EMNLP/NAACL), `AAAI`, `ACM` (ACM MM, SIGIR, KDD, CHI, etc.), `IEEE_JOURNAL` (IEEE Transactions / Letters, e.g., T-PAMI, JSAC, TWC, TCOM, TSP, TIP), `IEEE_CONF` (IEEE conferences, e.g., ICC, GLOBECOM, INFOCOM, ICASSP). Determines style file and formatting.
- **ANONYMOUS = true** — If true, use anonymous author block. Set `false` for camera-ready. Note: most IEEE venues do NOT use anonymous submission — set `false` for IEEE.
- **MAX_PAGES = 9** — Main body page limit. For ML conferences: counts from first page to end of Conclusion section, references and appendix NOT counted. **For IEEE venues: references ARE counted toward the page limit.** Typical limits: IEEE journal = no strict limit (but 12-14 pages typical for Transactions, 4-5 for Letters), IEEE conference = 5-8 pages including references.
- **DBLP_BIBTEX = true** — Fetch real BibTeX from DBLP/CrossRef instead of LLM-generated entries. Eliminates hallucinated citations. Zero install required. Set `false` to use legacy behavior (LLM search + `[VERIFY]` markers).

## Inputs

1. **PAPER_PLAN.md** — outline with claims-evidence matrix, section plan, figure plan (from `/paper-plan`)
2. **NARRATIVE_REPORT.md** — the research narrative (primary source of content)
3. **Generated figures** — PDF/PNG files in `figures/` (from `/paper-figure`)
4. **LaTeX includes** — `figures/latex_includes.tex` (from `/paper-figure`)
5. **Bibliography** — existing `.bib` file, or will create one

If no PAPER_PLAN.md exists, ask the user to run `/paper-plan` first or provide a brief outline.

## Orchestra-Guided Writing Overlay

Keep the existing workflow, file layout, and defaults. Use the shared references below only when they improve writing quality:

- Read `../shared-references/writing-principles.md` before drafting the Abstract, Introduction, Related Work, or when prose feels generic
- Read `../shared-references/venue-checklists.md` during the final write-up and submission-readiness pass
- Read `../shared-references/citation-discipline.md` only when the built-in DBLP/CrossRef workflow is insufficient

These references are support material, not extra workflow phases.

## Templates

### Venue-Specific Setup

The skill includes conference templates in `templates/`. Select based on TARGET_VENUE:

**ICLR:**
```latex
\documentclass{article}
\usepackage{iclr2026_conference,times}
% \iclrfinalcopy  % Uncomment for camera-ready
```

**NeurIPS:**
```latex
\documentclass{article}
\usepackage[preprint]{neurips_2025}
% \usepackage[final]{neurips_2025}  % Camera-ready
```

**ICML:**
```latex
\documentclass[accepted]{icml2025}
% Use [accepted] for camera-ready
```

**IEEE Journal** (Transactions, Letters):
```latex
\documentclass[journal]{IEEEtran}
\usepackage{cite}  % IEEE uses \cite{}, NOT natbib
% Author block uses \author{Name~\IEEEmembership{Member,~IEEE}}
```

**IEEE Conference** (ICC, GLOBECOM, INFOCOM, ICASSP, etc.):
```latex
\documentclass[conference]{IEEEtran}
\usepackage{cite}  % IEEE uses \cite{}, NOT natbib
% Author block uses \IEEEauthorblockN / \IEEEauthorblockA
```

### Project Structure

Generate this file structure:

```
paper/
├── main.tex                    # master file (includes sections)
├── iclr2026_conference.sty     # or neurips_2025.sty / icml2025.sty / IEEEtran.cls + IEEEtran.bst
├── math_commands.tex           # shared math macros
├── references.bib              # bibliography (filtered — only cited entries)
├── sections/
│   ├── 0_abstract.tex
│   ├── 1_introduction.tex
│   ├── 2_related_work.tex
│   ├── 3_method.tex            # or preliminaries, setup, etc.
│   ├── 4_experiments.tex
│   ├── 5_conclusion.tex
│   └── A_appendix.tex          # proof details, extra experiments
└── figures/                    # symlink or copy from project figures/
```

**Section files are FLEXIBLE**: If the paper plan has 6-8 sections, create corresponding files (e.g., `4_theory.tex`, `5_experiments.tex`, `6_analysis.tex`, `7_conclusion.tex`).

## Workflow

### Step 0: Backup and Clean

If `paper/` already exists, back up to `paper-backup-{timestamp}/` before overwriting. Never silently destroy existing work.

**CRITICAL: Clean stale files.** When changing section structure (e.g., 5 sections → 7 sections), delete section files that are no longer referenced by `main.tex`. Stale files (e.g., old `5_conclusion.tex` left behind when conclusion moved to `7_conclusion.tex`) cause confusion and waste space.

### Step 1: Initialize Project

1. Create `paper/` directory
2. Copy venue template from `templates/` — the template already includes:
   - All standard packages (amsmath, hyperref, cleveref, booktabs, etc.)

From wanshuiyin/Auto-claude-code-research-in-sleep, MIT.

More from wanshuiyin/Auto-claude-code-research-in-sleep