detecting-dnp3-protocol-anomalies

Files (4)

• LICENSE
• SKILL.md
• api-reference.md · references/
• agent.py · scripts/

SKILL.md (first lines)

# Detecting DNP3 Protocol Anomalies

## When to Use

- When monitoring SCADA systems in the energy sector where DNP3 is the primary protocol
- When building detection rules for DNP3-based attacks against RTUs and substations
- When investigating suspected unauthorized control commands sent via DNP3
- When deploying IDS with DNP3 deep packet inspection at utility substations
- When responding to alerts from OT monitoring platforms about DNP3 traffic anomalies

**Do not use** for non-DNP3 protocol monitoring (see detecting-modbus-command-injection-attacks for Modbus), for DNP3 Secure Authentication configuration (separate implementation), or for protocol-agnostic network anomaly detection.

## Prerequisites

- Network TAP/SPAN on DNP3 communication segments (TCP port 20000 or serial)
- Baseline of normal DNP3 traffic patterns (masters, outstations, poll intervals, function codes)
- Suricata or Zeek with DNP3 protocol parser enabled
- Understanding of DNP3 function codes and object groups used in the environment
- DNP3 communication topology map (master-to-outstation relationships)

## Workflow

### Step 1: Analyze DNP3 Traffic for Anomalies

```python
#!/usr/bin/env python3
"""DNP3 Protocol Anomaly Detector.

Monitors DNP3 communications for unauthorized control commands,
protocol violations, and deviations from established baselines.
Supports both TCP and serial DNP3 deployments.
"""

import struct
import sys
import json
from collections import defaultdict
from datetime import datetime
from typing import Dict, List, Optional, Set

try:
    from scapy.all import rdpcap, IP, TCP
except ImportError:
    print("Install scapy: pip install scapy")
    sys.exit(1)


# DNP3 Function Codes
DNP3_FUNCTIONS = {
    0x00: "Confirm", 0x01: "Read", 0x02: "Write",
    0x03: "Select", 0x04: "Operate", 0x05: "Direct Operate",
    0x06: "Direct Operate No Ack", 0x07: "Immediate Freeze",
    0x08: "Immediate Freeze No Ack", 0x09: "Freeze and Clear",
    0x0A: "Freeze and Clear No Ack", 0x0B: "Freeze at Time",
    0x0C: "Freeze at Time No Ack", 0x0D: "Cold Restart",
    0x0E: "Warm Restart", 0x0F: "Initialize Data",
    0x10: "Initialize Application", 0x11: "Start Application",
    0x12: "Stop Application", 0x13: "Save Configuration",
    0x14: "Enable Unsolicited", 0x15: "Disable Unsolicited",
    0x16: "Assign Class", 0x17: "Delay Measurement",
    0x18: "Record Current Time", 0x19: "Open File",
    0x1A: "Close File", 0x1B: "Delete File",
    0x1C: "Get File Info", 0x1D: "Authenticate File",
    0x1E: "Abort File", 0x81: "Response", 0x82: "Unsolicited Response",
}

# High-risk function codes that should trigger alerts
DNP3_CRITICAL_FUNCTIONS = {
    0x02,  # Write
    0x03, 0x04, 0x05, 0x06,  # Select/Operate/Direct Operate
    0x0D,  # Cold Restart
    0x0E,  # Warm Restart
    0x0F,  # Initialize Data
    0x10,  # Initialize Application
    0x12,  # Stop Application
    0x19, 0x1A, 0x1B,  # File operations (firmware update)
}


class DNP3AnomalyDetector:
    """Detects anomalies in DNP3 protocol communications."""

    def __init__(self, baseline_file: Optional[str] = None):
        self.alerts = []
        self.sessions = defaultdict(lambda: {
            "packet_count": 0,
            "function_codes": defaultdict(int),
            "control_commands": 0,
            "file_operations": 0,
            "restarts": 0,
        })
        self.packet_count = 0
        self.dnp3_count = 0

        self.authorized_masters: Set[str] = set()
        self.authorized_pairs: Dict[str, Set[str]] = defaultdict(set)
        self.baseline_functions: Dict[str, Set[int]] = defaultdict(set)

        if baseline_file:
            self.load_baseline(baseline_file)

    def load_baseline(self, filepath: str):
        """Load DNP3 communication baseline."""
        with open(filepath, "r") as f:
            baseline = json.load(f)

        for entry in baseline.get("authorized_communications", []):
            master = entry["master_ip"]
            outstation = entry["outstation_ip"]
            self.authorized_masters.add(master)
            self.authorized_pairs[master].add(outstation)
            self.baseline_functions[f"{master}->{outstation}"] = set(
                entry.get("expected_function_codes", [0x00, 0x01])
            )

    def parse_dnp3_header(self, payload: bytes) -> Optional[dict]:
        """Parse DNP3 data link layer and transport/application headers."""
        if len(payload) < 10:
            return None

From mukul975/Anthropic-Cybersecurity-Skills, Apache-2.0.

More from mukul975/Anthropic-Cybersecurity-Skills