airunway-aks-setup

Files (12)

• SKILL.md
• gpu-profiles.md · references/
• model-sizing.md · references/
• optional-gpu-day2.md · references/
• powershell-notes.md · references/
• step-1-verify.md · references/steps/
• step-2-controller.md · references/steps/
• step-3-gpu.md · references/steps/
• step-4-provider.md · references/steps/
• step-5-deploy.md · references/steps/
• step-6-summary.md · references/steps/
• troubleshooting.md · references/

SKILL.md (first lines)

# AI Runway AKS Setup

This skill walks users from a bare Kubernetes cluster to a running AI model deployment. Follow each step in sequence unless the user provides `skip-to-step N` to resume from a specific phase.

> **Cost awareness:** GPU node pools incur significant compute charges (A100-80GB can cost $3–5+/hr). Confirm the user understands cost implications before provisioning GPU resources.

## Prerequisites

This skill assumes an AKS cluster already exists. If the user does not have a cluster, hand off to the `azure-kubernetes` skill first to provision one (with a GPU node pool unless CPU-only inference is acceptable), then return here.

## Quick Reference

| Property | Value |
|----------|-------|
| Best for | End-to-end AI Runway onboarding on AKS |
| CLI tools | `kubectl`, `make`, `curl` |
| MCP tools | None |
| Related skills | `azure-kubernetes` (cluster setup), `azure-diagnostics` (baseline troubleshooting), optional `aks-gpu-inference` (existing GPU/inference Day-2 incidents only) |

## When to Use This Skill

Use this skill when the user wants to:
- Set up AI Runway on an existing AKS cluster from scratch
- Install the AI Runway controller and CRDs
- Assess GPU hardware compatibility for model deployment
- Choose and install an inference provider (KAITO, Dynamo, KubeRay)
- Deploy their first AI model to AKS via AI Runway
- Resume a partially-complete AI Runway setup from a specific step

## GPU setup versus Day-2 incidents

Keep initial GPU node-pool, provider, controller, and model setup in this skill.
For an incident affecting an existing GPU or inference deployment, load
[optional-gpu-day2.md](references/optional-gpu-day2.md) before deciding whether
to offer the focused optional add-on.

## MCP Tools

This skill uses no MCP tools. All cluster operations are performed directly via `kubectl` and `make`.

## Rules

1. Execute steps in sequence — load the reference for each step as you reach it
2. Report cluster state at each step: ✓ healthy, ✗ missing/failed
3. Ask for user confirmation before any install or deployment action
4. If a step is already complete, report status and skip to the next step
5. If the user provides `skip-to-step N`, start at step N; assume prior steps are complete

## Steps

| # | Step | Reference |
|---|------|-----------|
| 1 | **Cluster Verification** — context check, node inventory, GPU detection | [step-1-verify.md](references/steps/step-1-verify.md) |
| 2 | **Controller Installation** — CRD + controller deployment | [step-2-controller.md](references/steps/step-2-controller.md) |
| 3 | **GPU Assessment** — detect GPU models, flag dtype/attention constraints | [step-3-gpu.md](references/steps/step-3-gpu.md) |
| 4 | **Provider Setup** — recommend and install inference provider | [step-4-provider.md](references/steps/step-4-provider.md) |
| 5 | **First Deployment** — pick a model, deploy, verify Ready | [step-5-deploy.md](references/steps/step-5-deploy.md) |
| 6 | **Summary** — recap, smoke test, next steps | [step-6-summary.md](references/steps/step-6-summary.md) |

## Error Handling

| Error / Symptom | Likely Cause | Remediation |
|-----------------|--------------|-------------|
| No kubeconfig context | Not connected to a cluster | Run `az aks get-credentials` or equivalent |
| Controller in CrashLoopBackOff | Config or RBAC issue | `kubectl logs -n airunway-system -l control-plane=controller-manager --previous` |
| Provider not ready | Image pull or RBAC issue | `kubectl logs <pod-name> -n <namespace>` for the provider pod |
| ModelDeployment stuck in Pending | GPU scheduling failure or provider not ready | `kubectl describe modeldeployment <name> -n <namespace>` events |
| `bfloat16` errors at inference | T4 or V100 lacks bfloat16 support | Add `--dtype float16` to serving args |

For full error handling and rollback procedures, see [troubleshooting.md](references/troubleshooting.md).

From microsoft/skills, MIT.

More from microsoft/skills