firmware-analyst

Files (1)

• SKILL.md

SKILL.md (first lines)

# Download from vendor
wget http://vendor.com/firmware/update.bin

# Extract from device via debug interface
# UART console access
screen /dev/ttyUSB0 115200
# Copy firmware partition
dd if=/dev/mtd0 of=/tmp/firmware.bin

# Extract via network protocols
# TFTP during boot
# HTTP/FTP from device web interface
```

### Hardware Methods
```
UART access         - Serial console connection
JTAG/SWD           - Debug interface for memory access
SPI flash dump     - Direct chip reading
NAND/NOR dump      - Flash memory extraction
Chip-off           - Physical chip removal and reading
Logic analyzer     - Protocol capture and analysis
```

## Use this skill when

- Working on download from vendor tasks or workflows
- Needing guidance, best practices, or checklists for download from vendor

## Do not use this skill when

- The task is unrelated to download from vendor
- You need a different domain or tool outside this scope

## Instructions

- Clarify goals, constraints, and required inputs.
- Apply relevant best practices and validate outcomes.
- Provide actionable steps and verification.
- If detailed examples are required, open `resources/implementation-playbook.md`.

## Firmware Analysis Workflow

### Phase 1: Identification
```bash
# Basic file identification
file firmware.bin
binwalk firmware.bin

# Entropy analysis (detect compression/encryption)
# Binwalk v3: generates entropy PNG graph
binwalk --entropy firmware.bin
binwalk -E firmware.bin  # Short form

# Identify embedded file systems and auto-extract
binwalk --extract firmware.bin
binwalk -e firmware.bin  # Short form

# String analysis
strings -a firmware.bin | grep -i "password\|key\|secret"
```

### Phase 2: Extraction
```bash
# Binwalk v3 recursive extraction (matryoshka mode)
binwalk --extract --matryoshka firmware.bin
binwalk -eM firmware.bin  # Short form

# Extract to custom directory
binwalk -e -C ./extracted firmware.bin

# Verbose output during recursive extraction
binwalk -eM --verbose firmware.bin

# Manual extraction for specific formats
# SquashFS
unsquashfs filesystem.squashfs

# JFFS2
jefferson filesystem.jffs2 -d output/

# UBIFS
ubireader_extract_images firmware.ubi

# YAFFS
unyaffs filesystem.yaffs

# Cramfs
cramfsck -x output/ filesystem.cramfs
```

### Phase 3: File System Analysis
```bash
# Explore extracted filesystem
find . -name "*.conf" -o -name "*.cfg"
find . -name "passwd" -o -name "shadow"
find . -type f -executable

# Find hardcoded credentials
grep -r "password" .
grep -r "api_key" .
grep -rn "BEGIN RSA PRIVATE KEY" .

# Analyze web interface
find . -name "*.cgi" -o -name "*.php" -o -name "*.lua"

# Check for vulnerable binaries
checksec --dir=./bin/
```

### Phase 4: Binary Analysis
```bash
# Identify architecture
file bin/httpd
readelf -h bin/httpd

# Load in Ghidra with correct architecture
# For ARM: specify ARM:LE:32:v7 or similar
# For MIPS: specify MIPS:BE:32:default

From agent-skills-hub/agent-skills-hub, MIT.

More from agent-skills-hub/agent-skills-hub