TransitRadar — UK trains and buses

Install

Works with Claude Code, VS Code, Cursor, Windsurf. Read the repository before you give any tool access to your data.

npx agentmarket install connector/transitradar-co-uk-transitradar

About

No reviews yet. Installed it? Reviews come from verified installers only. How reviews work

Permissions

What this server can do and what it asks for, from its tool list and install config. Checked Oct 25, 2026.

Tools

16 read · 0 write · 0 deleteRead-only

Secrets

None asked for

Install scripts

Nothing to install (hosted)

Runs as

Hosted (remote endpoint)

Tools (16)

As the server listed them on Oct 25, 2026. Descriptions are the server’s own words; hidden characters are shown as [U+…].

• bus_disruptionsBus disruptionsread-only

  Current and planned bus disruptions in Great Britain from the Bus Open Data Service (SIRI-SX): diversions, closed stops, roadworks and events, each with the operators and lines affected and the stops named. Filter by operator code (NOC) or by a word matched against the text, e.g. a town, road or line. Rail incidents are the separate 'disruptions' tool.

• bus_performanceHow buses are running todayread-only

  Today's bus punctuality estimate for Great Britain, nationally and by operator: journeys counted, the share on time, early and late, and the average delay. Each bus journey is counted once, judged on arrival near its last stop, and only in the roughly 25 urban areas we sample, so it is an ESTIMATE of how buses are running, not an official figure. 'On time' follows the GB bus standard: up to 1 minute early or 5 minutes 59 late; running early counts against it.

• bus_stop_departuresNext buses from a stopread-only

  Next buses from a bus stop anywhere in Great Britain. Takes a stop name with its town or area; many stops share a name across the country, so 'Trafalgar Square' alone can land in Greater Manchester while 'Trafalgar Square London' finds Charing Cross. A stop letter can follow, e.g. 'Trafalgar Square London stop X'. A stop's ATCO/NaPTAN code also works. Live predictions in London (TfL); elsewhere the timetable, so a 'scheduled' time is not a live estimate. With 'to', only buses that go on to that stop are listed, each with its scheduled time there: the answer to 'next bus from Trafalgar Square t…

• daily_performanceHow the railway did on a dayread-only

  TransitRadar's own record of one completed day on GB passenger rail: how many trains ran, how many were cancelled, the share of recorded arrivals within five minutes at their destination, the same share counting each cancellation as a failure, per-operator figures, and the commonest delay and cancellation reasons. Measured at the destination, so it is stricter than, and not comparable with, the industry's published PPM. Available from 2026-08-06 up to yesterday; where fewer than half of arrivals were recorded, no punctuality figure is given.

• direct_destinationsWhere can I go without changingread-only

  Every station reachable from a GB railway station WITHOUT CHANGING TRAINS on a date, after a time, each with the train that gets there soonest (a later but faster train beats an earlier slow one), sorted by arrival. Includes places reached by staying aboard a train that divides or joins another en route: those rows carry an 'association' naming where, and the passenger must be in the right portion. Timetabled times, not live. Use plan_journey when a change of train is acceptable or a destination is already known.

• disruptionsRail disruptionsread-only

  Current GB rail incidents and planned engineering work from National Rail's KnowledgeBase: what is affected, the operators, the dates and a link to National Rail's notice. Optionally filter by operator (name or two-letter code) or by any text, such as a station, line or reason.

• find_trainFind a trainread-only

  Search the GB rail timetable for specific trains. The query combines terms: an operator and a headcode ('LNER 1S09', 'EMR 1H26'), a time and a station ('12:19 from Corby' — matched within about ten minutes either side), two stations ('Corby to St Pancras', which also finds trains calling at both), or a planning ID / UID ('C12345', or its first few characters). A headcode alone is not unique: the same four characters run in several parts of the country at once, so results for one headcode can be different trains, told apart by origin and destination. Returns planning IDs to pass to get_train.

• find_unitWhere is a train unitread-only

  Look up a GB passenger train unit or carriage by the five- or six-digit number painted on it (e.g. '360107'): which service it is working now, the other services it is booked to work today, and the last calling point it was reported at. This comes from the operator's rolling-stock allocation, which is a plan and may be wrong during disruption. The position is the last calling point reported, not a live GPS fix — the train is somewhere beyond it.

• get_trainTrain details and live runningread-only

  Full details of one train by its planning ID (UID, e.g. 'C04207'): every public calling point with booked, expected and actual times, platforms and per-stop cancellations, plus — for today's trains — where it was last reported and how late. A cancellation can apply to only some stops. 'lastReport' is the last place signalling or movement data placed the train, not a GPS position. Reasons are National Rail's own words.

• late_trainsTrains late or cancelled nowread-only

  GB passenger trains running late right now, and trains booked to be running now that are cancelled (wholly or part of the way). Each train has its route, how late it is, where it last reported, where it calls next, the reason Darwin gives, and a Delay Repay link once a claim is worth making. Optionally filter by operator (name or two-letter code) or set the lateness threshold.

• plan_door_to_doorPlan a journey by train and busread-only

  Plan a GB journey that may combine trains, buses and short walks, between railway stations, bus stops or coordinates, from the timetables. Each place can be a station name or CRS code, a bus stop with its town (e.g. 'Briggate Leeds'), a stop code, or 'lat,lon'. Returns the next few ways after a time with every leg: mode, line or train, where to board and alight, and times. Timetabled, not live. For rail only, plan_journey is simpler.

• plan_journeyPlan a rail journeyread-only

  Plan a GB rail journey between two stations from the timetable, including changes: the next few ways to get there after a time, each with departure, arrival, number of changes and every train to catch with where to board and alight. This is the timetable, not live running; for live times on a direct train use station_departures with 'to', and for one train's progress use get_train with its planning ID.

• search_stationsSearch stationsread-only

  Find GB railway stations by name or code. Returns each station's three-letter CRS code (e.g. KGX), its TIPLOC and whether it has step-free access. The CRS code is what the other station tools accept.

• station_departuresLive departures or arrivalsread-only

  Live departure or arrival board for a GB railway station, from National Rail's Darwin feed: booked time, expected time, actual time once reported, platform, operator and any delay or cancellation reason. With 'to', only trains that also call at that station are listed, each with its booked, expected and actual time there: the live answer to 'next train from Bolton to Darwen'. On an arrivals board, 'to' is where the train came from. An expected time equal to the booked one means no revision has been published, which usually means running to plan. A missing expected time is not a statement that …

• station_infoStation details and lift statusread-only

  Details of a GB railway station: address, managing operator, facilities, step-free access, industry codes (CRS, TIPLOC, STANOX, NLC) and, where Network Rail publishes it, the live status of each public lift. Lift status is 'In service', 'Out of service' or 'Data not available'; the last means the status is not known, and Network Rail's wording for it advises checking before travel. A station with no lifts listed is not necessarily a station without lifts; it may not report live status yet.

Signals

Last release

Oct 22, 2026 (8 days ago)

Details

Registry name

uk.co.transitradar/transitradar

Version

1.4.0

Auth

Auth not stated

License

License unknown

Website

transitradar.co.uk/assistants

First seen

Oct 24, 2026

Last checked

Oct 24, 2026

Source

Official MCP Registry