Perfboard Designer

Install

Works with Claude Code, VS Code, Codex, Cursor, Windsurf, Claude Desktop. Read the repository before you give any tool access to your data.

npx agentmarket install connector/perfboarddesigner-com-mcp

About

Use cases: ui-design

No reviews yet. Installed it? Reviews come from verified installers only. How reviews work

Permissions

What this server can do and what it asks for, from its tool list and install config. Checked Oct 25, 2026.

Tools

7 read · 4 write · 1 delete

Secrets

None asked for

Install scripts

None found

Runs as

Node.js package

Tools (12)

As the server listed them on Oct 25, 2026. Descriptions are the server’s own words; hidden characters are shown as [U+…].

• edit_projectEdit projectcan change or delete data

  Changes a project kept here, by a list of ops applied in order: add_part, update_part (move, turn, change value or ref), remove_parts, add_wire (from/to, or a `path` of holes made into one wire per leg), update_wire, remove_wires, set_board, add_cuts / remove_cuts (stripboard), set_pad (a note on a hole). If any op can't be done, none are. Returns what changed, where the pins of added or moved parts landed, and the board checked as validate_project does (with any expectNets remembered for it); when it has no errors, also its nets. get_project returns the whole file. The goal is a board that's …

• get_netsGet netsread-only

  Which pins the board connects: every net with its name (from its pins, e.g. GND), its pins ("U1.8 VCC" for a chip's pin, "D1.K" or "C1.+" for a polarized lead, "R1.1" otherwise) and the wires on it (indexes into wires). Also pins connected to nothing, wires that connect no pins, junctions (holes where three or more things are joined) and crossings (where a wire goes over another wire or over a hole without joining it). Wires are insulated jumpers: a wire joins only the holes at its two ends, so crossings are information, not connections or shorts. On a stripboard the strips connect too.

• get_partGet partsread-only

  Everything needed to place parts: for each, which project file list it goes in, its pins (offsets from pin 1 at rotation 0) and pin labels, polarity, value unit, holes its body covers, and an example entry. Ask for every part you use in one call with `ids`.

• get_pin_positionsGet pin positionsread-only

  Where every placed part's pins land, as [column, row] holes, with pin numbers and labels (e.g. U1 pin 8 VCC), after rotation, plus holes a part's body covers. Use it to route wires to the right holes. The project file doesn't store these: they follow from each part's anchor, rotation and footprint.

• get_projectGet projectread-only

  The whole project file of a project kept here, as the editor would save it (through version 8, preserving component identities and optional requirements), one entry per line.

• list_partsList partsread-only

  Lists the parts a project can place. Without a query: every part, grouped by category, as its id with its name and pin count; call it this way once to see what there is. With a query: the parts whose id, name, category or keywords contain all its words, or the closest ones when none do. Each part's `id` is its definitionId in the project file; use get_part for its pins and how to place it.

• make_share_linkMake share link

  Turns a project into a link that opens it in Perfboard Designer: the project travels inside the link, so it works without any server. Give the link to the user. Also returns `image`, the address of an SVG picture of the board (as the editor draws it), for showing it where images from links display, e.g. in Markdown (not in Claude or ChatGPT, which don't load them: show_board shows the board there). With store, the project is also stored on the Perfboard Designer server under a short id, and `stored` gives a short link to it, its file and its pictures (SVG and PNG): give the user both links. Th…

• new_projectNew project

  Starts a project kept here under a projectId: a blank board, or one of the example projects (perfboard://examples/...) to copy from. Returns the projectId and the project file. Then add parts and wires with edit_project, and pass the projectId to every other tool instead of the whole file.

• read_share_linkRead share link

  Reads the project out of a Perfboard Designer share link (z=, json=, downloaded src=, or a stored short link). Returns a project file through version 8, preserving component identities and optional requirements, kept under the returned projectId: change it with edit_project.

• render_boardRender boardread-only

  Draws the board as text, one cell per hole with column and row numbers: each part's pins by a key letter and pin number (a1, a2...), holes under a part's body, wire ends, the holes a wire runs over without joining them, strip cuts and holes with notes. Below it, which part each key is and every wire with its ends and net. Use it to see where there's free space and how wires run before placing parts or routing more. With format "png", a picture of the board as the editor draws it instead, to see how it looks: parts' bodies and where they reach, labels, wire colours. To show the user the board, …

• show_boardShow boardread-only

  Shows the user a picture of the board right in the conversation, as the editor draws it, with a button that opens it in Perfboard Designer. Only in clients that show MCP Apps (e.g. Claude, ChatGPT); elsewhere the user sees nothing, so give them make_share_link's link too. The picture goes to the user, not to you: to look at the board yourself, use render_board.

• validate_projectValidate project

  Checks a project file and lists every problem with where it is: entries the editor would leave out, unknown parts, pins off the board, two parts' pins or leads in one hole, overlapping parts, wires that connect nothing (a loose end, or no pins on their net), duplicate wires, a two-lead part with both leads on one net (shorted out), a wire passing over a pin or lead without ending there (so not joined to it), IC pins and two-lead parts' leads connected to nothing, supply rails shorted together, and on a stripboard, pins shorted by a strip or sitting in a cut hole. With expectNets, every connect…

Signals

Stars

17

Forks

7

Open issues

1

Last commit (this folder)

Oct 23, 2026 (5 days ago)

Last release

Oct 18, 2026 (10 days ago)

From GitHub (fetched Oct 24, 2026).

Details

Registry name

com.perfboarddesigner/mcp

Version

0.1.0

Auth

Auth not stated

Packages

npm perfboard-designer-mcp

License

License unknown

Repository

github.com/MaurerKrisztian/perfboard-designer

Website

perfboarddesigner.com/mcp-server/

First seen

Oct 24, 2026

Last checked

Oct 24, 2026

Source

Official MCP Registrygithub-graphql