Unifi MCP

Delete a zone-based firewall policy. Mutating operation: removed immediately and persisted on the UniFi console. Requires confirm=true because removing a policy changes traffic flow. Predefined controller policies are refused. Target by id from get_firewall_policies. Args: policy_id: Policy id to delete (from get_firewall_policies). confirm: Safety gate: must be True to delete. Defaults to False. site: Site to operate on. Defaults to "default". device: Optional console name to target a specific UniFi device; omit for default.

Delete a legacy firewall rule. Requires confirm=True. Mutating operation: permanently removes the rule from the controller. Args: rule_id: Firewall rule ID (from get_firewall_rules) confirm: Must be True to actually delete site: Site to operate on. Defaults to "default". device: Optional console name to target a specific console; omit for default. Returns: Deletion status

Delete a network/VLAN by name or ID. Mutating operation: removed immediately and persisted on the UniFi console. Requires confirm=true because deleting a network can drop clients and routes that depend on it. List networks with get_networks first to confirm the target. Args: name: Network name or record id to delete. site: Site to operate on. Defaults to "default". device: Optional console name to target a specific UniFi device; omit for default. confirm: Safety gate: must be True to delete. Defaults to False.

Delete a port forwarding rule. Mutating operation: removed immediately and persisted on the UniFi console. Requires confirm=true because removing a forward closes external access. Target by rule id from get_port_forwards. Args: rule_id: Port forward rule id to delete (from get_port_forwards). confirm: Safety gate: must be True to delete. Defaults to False. site: Site to operate on. Defaults to "default". device: Optional console name to target a specific UniFi device; omit for default.

Delete a non-running schedule. Requires confirm=true. Mutating operation: removes the identified schedule from the store. Returns success=false unless confirm=true. Use create_interval_schedule to add one, or set_schedule_enabled to pause instead of delete. Args: schedule_id: Identifier of the schedule to delete. confirm: Must be True to delete the schedule; without it the call is a no-op. Defaults to False.

Delete a webhook destination and queued deliveries. Requires confirm=true. Mutating operation: removes the identified webhook destination and its queued deliveries from the store. Returns success=false unless confirm=true. Use create_webhook_destination to add one. Args: destination_id: Identifier of the webhook destination to delete. confirm: Must be True to delete the destination; without it the call is a no-op. Defaults to False.

Delete a wireless network (SSID). Mutating operation: removed immediately and persisted on the UniFi console. Requires confirm=true because deleting an SSID disconnects its clients. Resolve the target by ID or name and review get_wlans first. Args: wlan: WLAN id or SSID name to delete. confirm: Safety gate: must be True to delete. Defaults to False. site: Site to operate on. Defaults to "default". device: Optional console name to target a specific UniFi device; omit for default.

Export a UniFi Protect recording clip as an MP4 file written to local disk. Mutating, file-writing operation: it resolves the camera (by id or name), fetches the recording for the requested time range, and writes an MP4 file into the server's confined export directory (the path is validated against that directory, so output_path must not escape it). Requires Protect username/password credentials configured for the console. The write is a no-op until confirm is set to true, at which point it returns the written file path and size in bytes. Use get_camera_snapshot for a single still image inste…

Export an HTML or CSV report rendered from the portable snapshot model. Mutating operation: writes a local report file immediately, persisted in the export directory. The call is rejected without writing unless confirm=true. Format must be "html" or "csv" and filename must end with the matching extension; plugins may register additional formats. Prefer export_portable_snapshot for the raw machine-readable model. Args: filename: Output report file name inside the confined export directory; must end with the chosen format extension (e.g. .html, .csv). format: Report renderer to use — "…

Export a deterministic secret-free JSON snapshot to a local confined file. Mutating operation: writes a local file immediately, persisted in the export directory. Returns the filename, size, schema version, and a content SHA-256 checksum for later verification with verify_snapshot. The call is rejected without writing unless confirm=true. Use export_network_report for human-readable HTML/CSV instead of the raw JSON model. Args: filename: Target file name written inside the confined export directory (no path traversal). confirm: Safety confirmation. Must be True to actually write; oth…

Remove a client from the controller's known-clients list. Destructive operation: deletes the client's stored identity and history; the client can still reappear on reconnect. Use kick_client to drop a session without deletion, or block_client to deny access persistently. Args: mac: Client MAC address to target. site: Site to operate on. Defaults to "default". device: Optional device name to target a specific console; omit for default.

Return the currently active alarms (faults and warnings) for a site. Read-only operation: it lists unacknowledged/active alarms with severity and message so you can see what needs attention. Use get_recent_events for the broad event feed including non-alarm activity; clear them with archive_all_alarms once handled, or use analyze_network_issues for a consolidated interpretation of alarms and health. Args: site: Site to query. Defaults to "default". device: Optional console/device name to target a specific UniFi console; omit to use the default.

Return a health overview for every site managed by one UniFi console. Read-only operation: it walks each site on the targeted console and returns a compact health snapshot per site (status, score, and key counts). Unlike get_global_health, this stays within a single console; unlike get_site_health, it covers all sites at once rather than one. Use get_global_health when you need cross-console aggregation; prefer get_site_health when you want full per-subsystem detail for a single named site. Args: device: Optional console/device name to target a specific UniFi console; omit to use…

Get the full configuration and runtime record for one Protect camera. Read-only operation: it returns the camera's model, firmware, resolution, recording mode, privacy/IR state, connection state, and live statistics. The camera is resolved by ID first and then by name, so either form is accepted. Use list_cameras first to find the camera_id; use get_camera_snapshot to capture an image, or get_camera_health_summary for a connectivity-only view. Args: camera_id: Protect camera identifier or name to look up. device: Optional Protect console name to target a specific UniFi Protect …

Summarize the connectivity and health of all cameras on one Protect console. Read-only operation: it partitions cameras into connected and disconnected sets, returns an overall status of "healthy" or "degraded", lists each disconnected camera as a critical issue, and offers remediation recommendations. Use this for a fleet-wide connectivity check; use list_cameras for the full per-camera detail or get_camera_details for one camera's complete record. Args: device: Optional Protect console name to target a specific UniFi Protect device; omit to use the first Protect-enabled device.

Capture a still image from a connected Protect camera as a base64 JPEG. Read-only operation: it requests a live frame from the camera and returns it as a base64-encoded JPEG plus camera name and id. If width and/or height are provided the image is resized to those pixel dimensions; if omitted the camera's native resolution is returned. A camera that is not in the CONNECTED state returns a success=false result rather than an image. Use get_camera_details to confirm the camera is online before calling. Args: camera_id: Protect camera identifier or name to capture from. device: Optional…

Get the full device record for one client by MAC address. Read-only operation: returns the client's identity, connection state, IP, signal/AP association, and history. Deeper than list_clients/list_all_clients, which return summarized rows only. Args: mac: Client MAC address to target. site: Site to operate on. Defaults to "default". device: Optional device name to target a specific console; omit for default.

Generate a client experience report with connection-quality metrics for a site. Read-only operation: it summarizes signal-strength distribution, roaming stats, failed connections, and problematic clients across the site. Use troubleshoot_client for a deep dive on one specific client, or get_device_health_summary for the infrastructure view rather than client-side. Args: site: Site to query. Defaults to "default". device: Optional console/device name to target a specific UniFi console; omit to use the default.

Get durable local tags and group membership for one known client. Read-only operation: resolves the client by identity, then returns its persisted local organization record (tags and group membership). This data is local to the server (local_only) and does not mutate the controller. Use set_client_tags or assign_client_group to change it. Args: identity: Client MAC, IP, hostname, or alias to resolve to a known client. site: Site to operate on. Defaults to "default". device: Optional device name to target a specific console; omit for default.

Describe validated controller QoS mutation capabilities. Read-only operation: reports whether a validated controller QoS adapter is available for the targeted device. Previews created by plan_client_qos_policy are always local; apply_client_qos_policy performs no controller mutation in the current release. Use this before planning a policy to set expectations. Args: device: Optional device name to target a specific console; omit for default.

Get traffic statistics (rx/tx, throughput) for one client by MAC address. Read-only operation: returns the client's cumulative and recent traffic counters. Use get_client_details for identity/connection state, or get_traffic_summary for site-wide traffic rather than a single client. Args: mac: Client MAC address to target. site: Site to operate on. Defaults to "default". device: Optional device name to target a specific console; omit for default.

Get detailed configuration and runtime record for one UniFi device. Read-only operation: returns the device's ports, radios, uplink, system stats, temperatures, and traffic counters. The device is resolved by MAC first, then by name. Use list_devices to find the MAC; use get_device_stats for a metrics-only view without the full config dump. Args: mac: Device MAC address (case-insensitive; aa:bb:cc:dd:ee:ff or aabbccddeeff). site: Site to operate on. Defaults to "default". device: Optional device name to target a specific console; omit for default.

Summarize device health across all APs, switches, and routers at a site. Read-only operation: it reports uptime, load, memory, temperature, firmware versions, and devices needing attention. Use get_site_health or get_network_health for overall/site status, analyze_network_issues for issues folded into a report, or get_client_experience_report for the client perspective. Args: site: Site to query. Defaults to "default". device: Optional console/device name to target a specific UniFi console; omit to use the default.

List the switch/gateway ports on a device with link and VLAN details. Read-only operation: returns each port's index, name, media (GE/SFP), link state, speed, native network (VLAN) ID, PoE mode, forward setting, and the last connected peer MAC/IP where known. Use this to find the port_idx and current values before calling set_device_port. Args: mac: Device MAC address (case-insensitive; aa:bb:cc:dd:ee:ff or aabbccddeeff). site: Site to operate on. Defaults to "default". device: Optional device name to target a specific console; omit for default.

Get performance and traffic statistics for one UniFi device. Read-only operation: returns CPU/memory load, temperatures, fan level, client counts (user/guest), traffic totals, and AP radio stats where applicable. Use get_device_details for the full config record instead of metrics, or list_devices for a lightweight summary. Args: mac: Device MAC address (case-insensitive; aa:bb:cc:dd:ee:ff or aabbccddeeff). site: Site to operate on. Defaults to "default". device: Optional device name to target a specific console; omit for default.

Return Deep Packet Inspection application-breakdown statistics for a site. Read-only operation: it ranks traffic by detected application/category so you can see what protocols and apps dominate usage. Use get_traffic_summary for a lighter volume-only overview, get_traffic_analysis for time-windowed trends and top talkers, or get_client_traffic for a single client's DPI view. Args: site: Site to query. Defaults to "default". device: Optional console/device name to target a specific UniFi console; omit to use the default.

List event source capabilities and background polling state. Read-only operation: returns each known event source with its capabilities and whether background polling is enabled. Use this to discover source names for poll_events_now, or list_runtime_events to read stored events.

Get zone-based firewall policies (UniFi Network 9+). Read-only operation: returns each policy's name, action, protocol, index order, and source/destination zone ids. Policies are evaluated in index order; predefined "(Return)" companions appear alongside custom rules. Use create_firewall_policy to add one, or set_firewall_policy_enabled / delete_firewall_policy to manage it. Args: site: Site to operate on. Defaults to "default". device: Optional console name to target a specific UniFi device; omit for default.

Get legacy firewall rule configurations for a site. Read-only operation: returns each rule's name, action, protocol, port, ruleset, and firewall-group bindings. Modern controllers use zone-based policies instead — see get_firewall_policies. Use create_firewall_policy for zone-based filtering. Args: site: Site to operate on. Defaults to "default". device: Optional console name to target a specific UniFi device; omit for default.

Summarize connected clients across every configured network console. Read-only operation: it aggregates active clients from each network-enabled device and computes totals (wireless/wired/blocked), the top 10 talkers by usage, and a per-device client count. Use this for fleet-wide client visibility; use get_global_inventory for the device roster, get_global_health for subsystem health, or list_clients on a single console for the full per-client detail. Returns: Dict with total_clients, wireless/wired/blocked counts, top_talkers, per_device counts, and an errors list when a console fa…

Aggregate site health across every configured network console into one report. Read-only operation: it collects per-subsystem site health (WAN/LAN/WLAN status, health score, and device/user counts) from each network-enabled device and folds them into a unified view with an overall "healthy" or "degraded" verdict. Use this for a single fleet-wide health check; use get_global_inventory for the device roster, get_global_client_summary for client counts, or get_site_health on a single console for full subsystem detail. Returns: Dict with overall_status, device_count, a per-device subsystems …

Aggregate the full device inventory across every configured network console. Read-only operation: it calls list_devices on each network-enabled device and merges the results into one list, tagging every entry with its source device name, plus any per-console errors. Use this to see every AP, switch, gateway, and router across all sites in one view; use list_unifi_devices for the console roster itself, or get_global_health / get_global_client_summary for aggregated health and client counts rather than the raw device records. Returns: Dict with total_devices, the merged devices list (each …

List all configured UniFi Protect liveviews (camera view layouts). Read-only operation: it returns each liveview's name, id, and the cameras and layout it includes on the targeted console. Use this to discover view groupings for dashboards or to confirm which cameras belong to a named liveview; it does not return footage or snapshots. Args: device: Optional Protect console name to target a specific UniFi Protect device; omit to use the first Protect-enabled device.

Return recent camera motion events, resolved to camera names and timestamps. Read-only operation: it queries Protect motion events over the lookback window, maps each event to its camera name and a human-readable timestamp, and returns the count and per-event list. Requires Protect username/password credentials configured for the console. Use get_smart_detections instead when you need AI classification (person/vehicle/animal/package) rather than raw motion; use get_protect_event_summary for aggregate counts. Args: hours: Lookback window in hours from now (default 24). limit: Maximum …

Return a single overall health summary for one site's network. Read-only operation: it aggregates WAN/LAN/WLAN status, a composite health score, and device/user tallies into one condensed report. Use get_site_health when you need full per-subsystem detail for that site, get_all_sites_health for a multi-site sweep on one console, or get_global_health for cross-console aggregation. Args: site: Site to query. Defaults to "default". device: Optional console/device name to target a specific UniFi console; omit to use the default.

Get all network/VLAN configurations for a site. Read-only operation: returns each network's name, purpose, VLAN id, subnet CIDR, and DHCP settings. Use create_network / update_network / delete_network to change them, or get_wlans for wireless networks. Args: site: Site to operate on. Defaults to "default". device: Optional console name to target a specific UniFi device; omit for default.

Get aggregate observation count and retained time range. Read-only operation. Returns how many observations are stored and the earliest-to-latest retained time span. Use to gauge whether query_observation_trends can cover a desired window.

Analyze a site's configuration and return optimization recommendations. Read-only operation: it checks channel selection, TX power, VLAN efficiency, port configurations, and bandwidth utilization to suggest improvements. Use analyze_network_issues when you want a fault/issue report instead of proactive tuning advice, or get_device_health_summary for device status only. Args: site: Site to query. Defaults to "default". device: Optional console/device name to target a specific UniFi console; omit to use the default.

List redacted trusted-plugin loading outcomes. Read-only operation. Returns whether trusted code and sandboxing are active plus each plugin's load outcome. Requires admin scope when called over HTTP. Use to audit which plugins loaded successfully after startup.

Get all port forwarding rules for a site. Read-only operation: returns each rule mapping an external port+protocol to an internal IP+port on the gateway. Use this to audit forwards and to find a rule id before delete_port_forward, or create_port_forward to add one. Args: site: Site to operate on. Defaults to "default". device: Optional console name to target a specific UniFi device; omit for default.

Get switch port profile configurations for a site. Read-only operation: returns each port profile's name and the settings applied to member switch ports (PoE, VLAN, forwarding). Use set_device_port to apply changes to a specific physical port. Args: site: Site to operate on. Defaults to "default". device: Optional console name to target a specific UniFi device; omit for default.

Inventory all UniFi Protect accessories: lights, sensors, chimes, and viewers. Read-only operation: it queries each accessory type on the targeted console and returns the raw records grouped by type along with a per-type count summary. Use this to audit Protect peripherals alongside cameras; it does not return camera devices (see list_cameras) nor event history. Args: device: Optional Protect console name to target a specific UniFi Protect device; omit to use the first Protect-enabled device.

Summarize all Protect events (motion, smart detections, doorbell) over a window. Read-only operation: it aggregates event counts by type and camera activity for the lookback window on the targeted console. Requires Protect username/password credentials configured for the console. Use this for a single high-level tally; use get_motion_events or get_smart_detections for the underlying event records, or get_recent_protect_activity for the latest raw events. Args: hours: Lookback window in hours from now (default 24). device: Optional Protect console name to target a specific UniFi Prote…

Return UniFi Protect system information for one console, including device counts. Read-only operation: it reports the Protect system version, NVR/storage status, and counts of cameras and accessories managed by the targeted console. Use this for a high-level overlay of a Protect deployment; use list_cameras or get_protect_accessories for the individual device inventory, or get_camera_health_summary for camera connectivity. Args: device: Optional Protect console name to target a specific UniFi Protect device; omit to use the first Protect-enabled device.

Return recent network events (connections, roams, admin actions) for a site. Read-only operation: it surfaces the newest logged events with type, timestamp, and subject so you can trace what changed on the network. Use get_alarms when you only care about active fault/warning alarms rather than the full event stream; use get_optimization_recommendations or analyze_network_issues for interpreted, actionable findings. Args: limit: Maximum number of events to return (default 50). site: Site to query. Defaults to "default". device: Optional console/device name to target a specific Uni…

Return the most recent Protect events across all cameras as a quick overview. Read-only operation: it fetches the latest events (up to limit) for the targeted console with camera names and timestamps resolved. Requires Protect username/password credentials configured for the console. Use this for a fast "what just happened" check; use get_protect_event_summary for aggregate counts or get_motion_events/get_smart_detections for filtered, time-windowed history. Args: limit: Maximum number of recent events to return (default 20). device: Optional Protect console name to target a specific…

Return the live Layer-3 routing table for a site's gateway. Read-only operation: it lists each route with destination, next-hop, interface, and source/metric so you can verify static and learned routes. Use get_networks to inspect configured VLAN/subnet definitions rather than active forwarding paths. Args: site: Site to query. Defaults to "default". device: Optional console/device name to target a specific UniFi console; omit to use the default.

Return redaction-safe UniFi MCP runtime health and service counts. Read-only operation. Reports counts of registered tools, configured data sources, and plugin status without exposing any secrets. Use to confirm the server and its sources are healthy before issuing deeper queries.

Get comprehensive health status for a site. Read-only operation: returns per-subsystem health (WAN/LAN/WLAN status, score, and device/user counts) for the named site. Use get_network_health for a lighter summary, or get_global_health across consoles. Args: site: Site to operate on. Defaults to "default". device: Optional console name to target a specific UniFi device; omit for default.

Get the configuration settings for a site. Read-only operation: returns the site's settings record (network, wireless, and advanced options) as stored on the controller. Use get_sysinfo for controller identity rather than tunable settings. Args: site: Site to operate on. Defaults to "default". device: Optional console name to target a specific UniFi device; omit for default.

Return AI smart-detection events (person, vehicle, animal, package) with types. Read-only operation: it queries Protect smart-detection events over the lookback window, maps each to its camera name and timestamp, and includes the smartDetectTypes and confidence score. Requires Protect username/password credentials configured for the console. Use detection_type to narrow to one class (e.g. "person"); use get_motion_events for raw motion without classification, or get_protect_event_summary for aggregate counts. Args: hours: Lookback window in hours from now (default 24). limit: Maximum…

Describe portable snapshot and report capabilities plus native backup limits. Read-only operation. Returns supported report formats (html, csv), whether native controller backup/restore are available, and the configured source list. Use to learn what export_portable_snapshot and export_network_report can produce before calling them.

Return the latest WAN speed-test result and run state for a site. Read-only operation: it reports download/upload/latency from the most recent test and whether a test is in progress. Use run_speed_test to initiate a new measurement; this does not start one. Args: site: Site to query. Defaults to "default". device: Optional console/device name to target a specific UniFi console; omit to use the default.

Get system information for the site controller. Read-only operation: returns controller identity, firmware version, and hardware/model details for the named site. Use get_site_settings for tunable settings instead of controller metadata. Args: site: Site to operate on. Defaults to "default". device: Optional console name to target a specific UniFi device; omit for default.

Analyze site traffic patterns over a configurable time window. Read-only operation: it reports top talkers, application breakdown (DPI), bandwidth trends, and unusual activity for the lookback period. Use get_traffic_summary for a quick volume-only snapshot, get_dpi_stats for the app breakdown without the time series, or get_client_traffic for one client. Args: hours: Lookback window in hours from now (default 24). site: Site to query. Defaults to "default". device: Optional console/device name to target a specific UniFi console; omit to use the default.

Return a condensed traffic-volume summary for a site. Read-only operation: it reports overall throughput and totals without the per-app or time-series detail. Use get_dpi_stats for application-level breakdown, get_traffic_analysis for windowed trends and top talkers, or get_client_traffic for a specific client. Args: site: Site to query. Defaults to "default". device: Optional console/device name to target a specific UniFi console; omit to use the default.

Get all wireless network (SSID) configurations for a site. Read-only operation: returns each WLAN's name, id, enabled state, guest flag, and security settings. Use create_wlan / update_wlan / delete_wlan to change them, or get_networks for wired networks. Args: site: Site to operate on. Defaults to "default". device: Optional console name to target a specific UniFi device; omit for default.

Force-disconnect a client; it may reconnect normally. Mutating operation: drops the active session without a persistent block, so the client can re-associate. Use block_client/unblock_client for a lasting block, or forget_client to remove the client record entirely. Args: mac: Client MAC address to target. site: Site to operate on. Defaults to "default". device: Optional device name to target a specific console; omit for default.

List every known client (connected and offline) on a site. Read-only operation: includes clients not currently connected, so it is the superset of list_clients. Use get_client_details for deep per-client detail or list_clients when you only need active connections. Args: site: Site to operate on. Defaults to "default". device: Optional device name to target a specific console; omit for default.

List every UniFi Protect camera with its online state and identity. Read-only operation: it returns a summary per camera (name, model, state, and connection status) for the targeted Protect console. Use this to discover the camera_id values needed by get_camera_details, get_camera_snapshot, get_camera_health_summary, and the event tools. Use get_camera_health_summary when you only need aggregate connected/disconnected counts rather than the full per-camera list. Args: device: Optional Protect console name to target a specific UniFi Protect device; omit to use the first Protect-en…

List local client groups and deterministic member counts. Read-only operation: returns the local groups (local_only) for the controller/site with a deterministic member count per group. Use list_clients_by_organization to enumerate the actual member identities. Args: site: Site to operate on. Defaults to "default". device: Optional device name to target a specific console; omit for default.

List all currently connected (online) clients on a site. Read-only operation: returns only clients with an active connection at query time. For the historical/known roster including offline clients use list_all_clients; for deep per-client detail use get_client_details. Args: site: Site to operate on. Defaults to "default". device: Optional device name to target a specific console; omit for default.

List stable client identities for exactly one local tag or group. Read-only operation: returns the persisted client keys (MACs) that match a single tag or group filter (local_only). Exactly one of tag or group must be supplied; supplying neither or both is an error. Use list_client_groups to discover group names. Args: tag: Optional local tag to filter clients by; mutually exclusive with group. group: Optional local group name to filter clients by; mutually exclusive with tag. site: Site to operate on. Defaults to "default". device: Optional device name to target a sp…

List all UniFi network devices (APs, switches, routers) on a site. Read-only operation: returns a per-device summary for the targeted site, including name, MAC, model, type, IP, online state, uptime, and firmware version. Use this to discover the MAC values needed by get_device_details, restart_device, and the other device tools. Distinction: use list_unifi_devices to see the server's configured consoles (controller roster); use get_global_inventory for an aggregated inventory across all consoles. This tool lists devices *within* one site on one console. Args: site: Site to operate on. …

List redacted background job run outcomes. Read-only operation: returns up to `limit` recent schedule/job run records (status, timestamps) with secret values redacted. Use run_schedule_now or list_schedules to discover runnable schedules. Args: limit: Maximum number of job runs to return. Defaults to 100.

List the aggregate observation scopes currently retained. Read-only operation. Returns the distinct scope dimensions (source, controller, site) present in the observation store. Use to discover valid filter values for query_observation_trends.

List normalized events retained by the optional runtime store. Read-only operation: returns up to `limit` normalized events persisted by the runtime store. Requires UNIFI_RUNTIME_ENABLED=true; otherwise unavailable. Use get_event_polling_status to see which sources feed events. Args: limit: Maximum number of events to return. Defaults to 100.

List allowlisted interval schedules. Read-only operation: returns the persisted interval schedules (name, job, interval, enabled) and whether background automation is enabled. Use create_interval_schedule to add one, or run_schedule_now to trigger it.

List all UniFi sites accessible to the current user. Read-only operation: returns each site's id and name from the targeted console(s). Use get_site_health / get_site_settings for per-site detail once you have a site name. Args: device: Optional console name to target a specific UniFi device; omit for the default device.

List every UniFi device (console) configured for this server. Read-only operation: it returns each configured device's name, controller URL, site, and the services it exposes (network, protect), plus convenience lists of network-only and protect-only device names. This is the authoritative source for the device name accepted by every other tool's optional ``device`` parameter. Use get_global_inventory / get_global_health when you instead want aggregated data across those consoles rather than the console roster itself. Returns: Dict with total_devices, a per-device list, and network_devic…

List redacted webhook delivery and dead-letter state. Read-only operation: returns up to `limit` delivery records (status, attempts, dead-letter state) with secret values redacted. Use test_webhook_destination to trigger a send, or list_webhook_destinations to see configured endpoints. Args: limit: Maximum number of delivery records to return. Defaults to 100.

List webhook destinations without secret values. Read-only operation: returns configured outbound webhook destinations with secret material omitted. Use create_webhook_destination to add one, or list_webhook_deliveries to see send history.

Enable or disable LED blinking to physically locate a device. Mutating operation: toggles the locator LED on the device and is persisted on the console. Set enabled=True to start blinking, False to stop. This changes only the LED state and has no effect on connectivity or config. Args: mac: Device MAC address (case-insensitive; aa:bb:cc:dd:ee:ff or aabbccddeeff). enabled: True to start LED blinking, False to stop. Defaults to True. site: Site to operate on. Defaults to "default". device: Optional device name to target a specific console; omit for default.

Persist a deterministic QoS target preview without controller mutation. Mutating (local) operation: resolves selector_type/selector_value to concrete client keys and stores a durable QoS plan (plan_token) on the server with the requested download/upload limits. It does NOT change the controller. Pair the returned plan_token with apply_client_qos_policy to attempt activation. Requires UNIFI_RUNTIME_ENABLED=true; use get_client_qos_capabilities to check adapters. Args: selector_type: Scope of the policy - "client", "tag", or "group". selector_value: Client identity (MAC/IP/hostname) wh…

Poll supported event sources now and durably deduplicate results. Mutating (local) operation: triggers an immediate poll of matching event sources, inserts new normalized events into the runtime store, and deduplicates against what is already persisted. Requires UNIFI_RUNTIME_ENABLED=true. Use get_event_polling_status to discover source names; use list_runtime_events to read stored results. Args: source: Optional source name to poll a single source; omit for all sources. device_name: Optional console/device name to filter sources; omit for all.

Force re-provision a device with its current configuration. Mutating operation: re-pushes the existing config to the device and is persisted on the console, without changing firmware or power-cycling like upgrade_device or restart_device. Use after config edits to force the device to re-adopt current settings. Args: mac: Device MAC address (case-insensitive; aa:bb:cc:dd:ee:ff or aabbccddeeff). site: Site to operate on. Defaults to "default". device: Optional device name to target a specific console; omit for default.

Query bounded UTC trend buckets for an observation kind and metric. Read-only operation. Returns evenly spaced time buckets between start and end with explicit gaps for missing intervals, so callers can distinguish absence from zero. Bucket size defaults to 300 seconds. Use capture_observations_now first if recent data is missing. Args: kind: Observation category to query (e.g. "health", "client", "device"). metric: Metric name within the kind (e.g. "latency_ms", "cpu_pct"). start: Inclusive UTC start timestamp (ISO-8601). end: Inclusive UTC end timestamp (ISO-8601). buck…

Create a DHCP reservation pinning an IP to a client. Mutating operation: reserves the client's current IP (when ip is omitted) or the given IPv4 address, so the client keeps it across leases. Requires the client to be known; use list_clients to find the current IP if needed. Args: client: Client MAC address or name to reserve an IP for. ip: Optional IPv4 address to reserve; omit to keep the client's current IP. site: Site to operate on. Defaults to "default". device: Optional device name to target a specific console; omit for default.

Restart (reboot) a UniFi device by MAC address. Mutating operation: sends a reboot command that is persisted on the console; the device goes offline briefly and reconnects. Unlike provision_device (re-push config without reboot) and upgrade_device (firmware update), this power-cycles the device. No other config change is needed. Args: mac: Device MAC address (case-insensitive; aa:bb:cc:dd:ee:ff or aabbccddeeff). site: Site to operate on. Defaults to "default". device: Optional device name to target a specific console; omit for default.

Run one allowlisted schedule immediately. Requires confirm=true. Mutating operation: executes the identified schedule's job once, outside its normal interval, and records the run. Returns success=false unless confirm=true. Use list_job_runs to inspect the outcome; use set_schedule_enabled to disable auto-runs. Args: schedule_id: Identifier of the schedule to run immediately. confirm: Must be True to run the schedule; without it the call is a no-op. Defaults to False.

Start an on-demand WAN speed test from the site gateway. Mutating/long-running operation: it triggers a test against the speed-test endpoint and returns a handle or immediate result; poll get_speed_test_status for completion. Use get_speed_test_status to read the latest result without starting a new test. Args: site: Site to query. Defaults to "default". device: Optional console/device name to target a specific UniFi console; omit to use the default.

Replace local client tags by stable identity. Requires confirm=true. Mutating operation: overwrites the client's persisted local tags with the supplied list and is stored on the server (local_only), not the controller. Returns success=false unless confirm=true. Use get_client_organization to read current tags first; use assign_client_group for group membership. Args: identity: Client MAC, IP, hostname, or alias to resolve to a known client. tags: Full replacement tag list; an empty list clears all tags. site: Site to operate on. Defaults to "default". device: Optional device …

Configure a single switch port: native VLAN, PoE mode, name, or enable state. Mutating operation: applied immediately and persisted on the console, changing untagged VLAN traffic, PoE delivery, or link state on that port. Only the fields you provide change. Requires confirm=true because a port change can disrupt connectivity for the attached device or downstream network. Use get_device_ports first to find the port_idx and current values. Args: mac: Device MAC address (case-insensitive; aa:bb:cc:dd:ee:ff or aabbccddeeff). port_idx: Port number to configure (1-based; e.g. 1-24 …

Enable or disable a zone-based firewall policy. Mutating operation: applied immediately and persisted on the UniFi console. Targets the policy by id from get_firewall_policies. Predefined controller policies can be toggled but not deleted. Inspect state with get_firewall_policies. Args: policy_id: Policy id to toggle (from get_firewall_policies). enabled: True to enable, False to disable. site: Site to operate on. Defaults to "default". device: Optional console name to target a specific UniFi device; omit for default.

Enable or pause a schedule. Requires confirm=true. Mutating operation: flips the enabled flag on the identified schedule and persists it. Returns success=false unless confirm=true. Use create_interval_schedule to add, or delete_schedule to remove. Args: schedule_id: Identifier of the schedule to modify. enabled: True to enable (run on interval) or False to pause it. confirm: Must be True to change the schedule; without it the call is a no-op. Defaults to False.

Enable or pause a webhook destination. Requires confirm=true. Mutating operation: flips the enabled flag on the identified webhook destination and persists it. Returns success=false unless confirm=true. Use create_webhook_destination to add, or delete_webhook_destination to remove. Args: destination_id: Identifier of the webhook destination to modify. enabled: True to enable delivery or False to pause it. confirm: Must be True to change the destination; without it the call is a no-op. Defaults to False.

Send a synthetic payload to a webhook destination. Requires confirm=true. Mutating (external) operation: dispatches a synthetic test payload to the identified destination and records the delivery outcome. Returns success=false unless confirm=true. Use list_webhook_deliveries to inspect the result. Args: destination_id: Identifier of the webhook destination to test. confirm: Must be True to send the test payload; without it the call is a no-op. Defaults to False.

Run a deep-dive troubleshooting analysis for one specific client. Read-only operation: it examines connection history, signal quality, AP associations, roaming events, and potential issues for the named client. Use get_client_experience_report for a site-wide client-quality overview, or get_client_details for the raw record of one client without the analysis. Args: mac: MAC address of the client to troubleshoot. site: Site to query. Defaults to "default". device: Optional console/device name to target a specific UniFi console; omit to use the default.

Remove a prior block so a client can reconnect to the network. Mutating operation: clears the persistent block set by block_client. Use block_client to re-block, or kick_client for a non-persistent disconnect. Args: mac: Client MAC address to target. site: Site to operate on. Defaults to "default". device: Optional device name to target a specific console; omit for default.

Update a camera's configuration. Mutating operation: changes are applied immediately and persisted on the Protect console. Requires username/password configured for the device. Args: camera: Camera ID or name (resolved by name if not an ID) name: New camera name is_recording_enabled: Enable/disable recording recording_mode: Recording mode — "always", "motion", "smart_detect", "never" device: Optional Protect console name to target a specific UniFi Protect device; omit for first configured Protect device. Returns: Updated camera configuration

Update a legacy firewall rule. Only provided fields are changed. Mutating operation: applied immediately and persisted on the controller. Use get_firewall_rules to find the rule ID first. Args: rule_id: Firewall rule ID (from get_firewall_rules) name: New rule name action: Action — "accept", "drop", or "reject" protocol: Protocol — "tcp", "udp", "icmp", "all", or IANA number dst_port: Destination port or range src_zone: Source zone ID dst_zone: Destination zone ID src_port: Source port or range logging: Enable/disable logging enabled: Enable/disable th…

Update a network/VLAN; only the fields you provide change. Mutating operation: applied immediately and persisted on the UniFi console. A single field change preserves the network's other settings. Pass both empty dhcp_start and dhcp_stop to disable DHCP. Requires confirm=true because VLAN, routing, or enable-state changes can disconnect clients. Inspect with get_networks. Args: name: Network name or record id to update. name_new: Rename the network to this value. subnet: New subnet in CIDR form (e.g. "192.168.50.1/24"). vlan: New VLAN id (1-4094); pass -1 to clear VLAN taggin…

Update one section of a site's settings. Mutating operation: changes are applied immediately and persisted. Site settings are grouped into sections ("locale", "ntp", "mgmt", ...) and each call writes a single section, named by the "key" field in settings. Use get_site_settings first to see the sections and their current values. Args: settings: Dictionary of settings to update, including a "key" field naming the section (e.g., {"key": "locale", "timezone": "America/Los_Angeles"}). site: Site to operate on. Defaults to "default". device: Optional console name to target a sp…

Update a wireless network (SSID); only the fields you provide change. Mutating operation: applied immediately and persisted on the UniFi console. Any single field updates the matching SSID (resolved by ID or name). Requoting passphrase sets the WiFi password; pmf_mode is disabled|optional|required. Inspect with get_wlans. Args: wlan: WLAN id or SSID name to update. enabled: Enable or disable the SSID. hide_ssid: Hide the SSID from beacon broadcasts. passphrase: New WiFi password (minimum 8 characters). wpa3_support: Enable WPA3 support on the SSID. wpa3_transition: WP…

Upgrade a device's firmware to the latest available version. Mutating operation: initiates a firmware upgrade that is persisted once applied; the device reboots during the update. Unlike restart_device (plain reboot) and provision_device (config re-push), this changes the running firmware. Only proceeds when an upgrade is available on the console. Args: mac: Device MAC address (case-insensitive; aa:bb:cc:dd:ee:ff or aabbccddeeff). site: Site to operate on. Defaults to "default". device: Optional device name to target a specific console; omit for default.

Verify the schema and checksum of a confined snapshot export. Read-only operation. Reads the named snapshot from the export directory and validates its schema, redaction status, and content SHA-256. Returns validity plus schema version and checksum for integrity checks. Use after export_portable_snapshot to confirm the file is intact and secret-free. Args: filename: Name of the snapshot file (within the confined export directory) to validate.