MagicON RF Design Engines

Install

Works with Claude Code, VS Code, Cursor, Windsurf. Read the repository before you give any tool access to your data.

npx agentmarket install connector/magiccadai-magicon

About

No reviews yet. Installed it? Reviews come from verified installers only. How reviews work

Permissions

What this server can do and what it asks for, from its tool list and install config. Checked Oct 25, 2026.

Tools

17 read · 0 write · 0 deleteRead-only

Secrets

None asked for

Install scripts

Nothing to install (hosted)

Runs as

Hosted (remote endpoint)

Tools (17)

As the server listed them on Oct 25, 2026. Descriptions are the server’s own words; hidden characters are shown as [U+…].

• check_groundingCheck a draft against engine resultsread-only

  Check a draft passage against the engine results computed in THIS session. It returns every figure no engine produced, and every claim it checks that the results do not support or contradict (for example a solver score called a loss), each in `findings` with the reason. Run it before publishing or handing over a report, fabrication sheet, BOM summary or any other figure-bearing deliverable built from these tools. It computes nothing and adds no evidence — it only reports what the results back. Fix each finding the way its `why` says: quote the engine's own value, call the tool that computes it…

• compare_rf_chainsCompare transmit chain alternativesread-only

  Multi-objective RF chain comparison: designs the primary chain with the convergent orchestrator, generates alternative chains by swapping components, scores every variant on cost / size / performance, and returns the ranked list with a Pareto frontier — the same engine as the Guided 'Compare Alternatives' panel (POST /api/rf-chain/design-multi). Call with no arguments after a chain design to compare that design.

• design_patch_antennaDesign a patch antenna or arrayread-only

  Design a rectangular microstrip patch antenna (and, when both nx and ny are given, a uniform planar array of it) using the Balanis cavity/transmission-line + array-factor model — the SAME engine behind POST /api/antenna/patch/design and the Guided Phase IV antenna panel. The substrate (dk/df/h) derives from the latest solved stackup's outer prepreg dielectric unless dk/df/h_mm are given explicitly. Returns patch dimensions, resonance/bandwidth/gain, and (for an array) beamwidths, pattern cuts, and a grating-lobe check. The designed gain auto-applies to the chain's antennaGainDbi (compliance/SA…

• design_rf_chainDesign a transmit chainread-only

  Design a complete RF transmitter chain with the convergent orchestrator: selects the driver, PA, filter, and connector (the signal source is the user's input power by default — no VCO unless one is explicitly the generator), matches drive power between stages, inserts a pre-driver or attenuator when needed to reach the target output power, and returns the BOM plus a convergence summary (achieved vs target output). When the BOM's pricingCoverage is 'partial', total_usd is a subtotal of pricedLines of totalLines parts: never call it the total, and state no figure for the unpriced parts. For a re…

• design_rf_receiverDesign a superheterodyne receiverread-only

  Design or analyse a superheterodyne RECEIVER. Selects catalog parts for each slot (limiter, LNA, image filter, mixer, LO, IF filter, IF amp, step attenuator) and returns the frequency plan (image, half-IF, LO leakage), the cascaded noise figure, noise floor, MDS, sensitivity, SFDR and dynamic range, plus the ADC interface (sample rate, Nyquist zone, ENOB, jitter limit). Pass rfFrequencyHz to design one; pass stages[] only for a bench receiver the user described with their own numbers. For a transmitter, use design_rf_chain instead. For a module that shares one antenna between transmit and rece…

• design_tr_moduleDesign a T/R moduleread-only

  Design a T/R (transmit/receive) module that shares ONE antenna between a transmitter and a receiver. Designs both chains through the existing engines, selects the shared front end (a T/R switch, or a circulator with a receive-path limiter), and returns four safety budgets: TX-to-RX isolation against the receiver's damage limit, the receive window left after switching and limiter recovery (with the blind range: the closest echo the receiver can hear), limiter leakage driving the LNA into compression, and transmit power against each part's survivability rating. Pass frequencyGhz and targetOutput…

• find_components_by_specFind parts that meet a specread-only

  Find real parts in the validated catalog that meet a spec: a part type, an operating frequency in GHz, and optional limits (noise figure, gain, P1dB, Psat, OIP3, insertion loss). Returns the matching parts, best first on the first limit, each with its headline figures and the datasheet page for each figure where one is on file, as lookup_component_by_mpn gives them. Parts whose record lacks a limited figure are named as not compared, never counted as matches. Pass only figures your user stated; an untraceable one is refused.

• lookup_component_by_mpnLook up a part's datasheet figuresread-only

  Look up an RF component in the validated catalog by manufacturer part number: the catalog's summary of its headline figures, not the full datasheet. Returns the frequency, power and gain ranges, package, datasheet link, and the headline figures (Psat, P1dB, gain, noise figure, OIP3, insertion and conversion loss, junction-to-case thermal resistance, maximum junction temperature), each with its datasheet page where one is on file. Figures the record lacks are listed as not in the record, and internal estimates are named but never given as numbers. It does NOT hold derating, absolute-maximum rat…

• run_compliance_analysisRun compliance checksread-only

  Audit the solved stackup against PCB standards (IPC-2221, IPC-6012, IPC-4101, MIL, UL-94, RoHS, REACH): per-rule pass/fail with severities and remediation. Reuses the engine behind POST /api/compliance/check. Layers are derived from the solved stackup and standards default to IPC-2221 + IPC-6012 Class 2 — call with no arguments once a stackup exists.

• run_glass_weave_analysisRecommend a PCB glass-weave styleread-only

  Recommend PCB glass-weave (fiber-weave) styles for the current design: ranks catalogued styles by impedance variation and cost for the design frequency and marks the cheapest one meeting the impedance tolerance. Reuses the Phase-24 engine behind POST /api/glass-weave/recommend. Frequency is derived from the solved stackup / RF specs; tolerance and trace width default to stated assumptions — call with no arguments once a design exists.

• run_link_budgetRun a link budgetread-only

  Compute a cascaded RF link budget. For the chain just designed, call with NO arguments — the server derives stages and input power from the design. Pass stages + inputPowerDbm only for a bench/hypothetical chain. Returns per-stage output power, cumulative gain, Friis cascaded NF, gain-referred reciprocal-sum cascaded OIP3, P1dB headroom warnings, and overall risk. Optionally pass bandwidthHz (and requiredSnrDb) to also get the receiver noise floor, MDS, sensitivity, SFDR, and instantaneous dynamic range. For a link through the air between two antennas (EIRP, path loss, range), use run_ota_link…

• run_ota_linkRun an over-the-air link budgetread-only

  Compute a one-way over-the-air link budget — EIRP, free-space path loss (Friis), received power, link margin against receiver sensitivity, a closes/marginal/fails verdict, and the maximum range — using the SAME engine behind POST /api/ota-link/compute. Receiver sensitivity is reused from a prior link budget and transmit antenna gain/frequency from a prior antenna design when not given. FREE-SPACE ONLY: excludes rain, terrain, multipath and fading beyond the misc-loss and fade-margin inputs. Distance and misc loss are user assumptions, disclosed on the result. For the stage-by-stage cascade thr…

• run_pdn_analysisRun power-delivery analysisread-only

  Run a PDN (power delivery network) impedance analysis: interplanar plane-pair capacitance, multi-cap decoupling impedance vs. target impedance, violations, and recommended decoupling caps. Reuses the Phase-25 engine behind POST /api/pdn/analyze. Inputs are derived server-side from the solved stackup, the BOM's PDN passives, and the power-tree rail — call with no arguments once a design exists.

• run_planar_filterSynthesize a planar PCB filterread-only

  Synthesize a passive planar (copper-on-PCB) filter from analytical formulas: stepped-impedance / open-stub low-pass, or parallel-coupled / hairpin band-pass, Chebyshev or Butterworth. Returns per-section line impedances (Z0e/Z0o for coupled sections), width/spacing, quarter-wave lengths, the total occupied board area, a copper footprint, passband markers, a simulated S21/S11 frequency response (response_curve) with modeled insertion loss / return loss / 3-dB bandwidth (response_summary), and accuracy warnings. Reuses the engine behind POST /api/planar-filter/compute (SSOT). Use it to replace a…

• run_radar_performanceCompute radar range and waveform limitsread-only

  Compute radar performance — the monostatic range equation (received power, SNR vs range, maximum detection range, coherent/non-coherent integration gain) and pulsed-waveform relations (duty cycle, unambiguous range/velocity, range resolution, blind speeds) — using the SAME engine behind POST /api/radar/performance. Antenna gain enters as a dBi number; the detection floor is reused from a prior link budget's MDS when not given. RCS, target range, and system loss are user assumptions, disclosed on the result.

Signals

Last release

Oct 9, 2026 (20 days ago)

Details

Registry name

io.github.magiccadai/magicon

Version

1.1.0

Auth

Auth not stated

License

License unknown

Website

pcbgenerator.com

First seen

Oct 24, 2026

Last checked

Oct 24, 2026

Source

Official MCP Registry