ChainRay

Compare DeFi lending rates across protocols. EVM: Aave V3 vs Compound V3 side-by-side. Solana: Kamino + staking yield.

Get Uniswap V3 LP pool statistics including liquidity, fee tiers, and current tick data.

Assess DeFi protocol health: combines TVL, utilization rates, and liquidation frequency into a composite health score (0-100). Use for protocol-level DeFi health and stress signals on one chain. It does not rank yields or inspect a token contract; use defi.aggregator for cross-chain lending rankings, defi.compare for protocol rates, or token.risk for token risk.

Read Uniswap V3 pool state for a token pair: current price, active liquidity, fee tier. EVM only. Use when a known token pair needs pool-depth and active-liquidity context. It requires both token addresses and does not rank lending yields; use defi.aggregator or defi.compare for rates.

Find the best DeFi yield opportunity combined with optimal gas timing.

Calculate total value locked (TVL) in DeFi protocols (Aave V3, Compound V3) directly from on-chain aToken and Comet supplies.

Get live DeFi lending rates. EVM: Aave V3 supply/borrow APY. Solana: Kamino KLend reserves + native staking yield.

Get 6-hour gas fee trend with 36 sampled data points. EVM: base fee per block. Solana: TPS performance samples. Scope: recent sampled fee history and trend. Use this for 'how have fees behaved recently?'. It is not a current quote (gas.tracker), a forecast (gas.predict), or a submission recommendation (gas.optimize).

Gas price optimization advisor: analyzes recent block patterns to recommend the best time to transact. Includes savings estimate. Scope: read-only submission-timing advice derived from current and recent fee conditions. Use this for 'when should I submit?'. It is not the raw current quote (gas.tracker), a history response (gas.history), or a standalone forecast (gas.predict).

Predict near-future gas prices using moving average and trend analysis of recent block base fees. Returns prediction, trend, and recommendation. Scope: short-horizon fee forecast from recent samples. Use this for 'what may fees be soon?'. It is not a live quote (gas.tracker), historical data (gas.history), or a timing recommendation (gas.optimize), and it never executes a transaction.

Get current gas/fee data. EVM: base fee, priority fee, predictions. Solana: priority fees, TPS, congestion level. Scope: current fee snapshot for a transaction decision. Use this for 'what are fees now?'. It is not a historical series (gas.history), a short-horizon forecast (gas.predict), or timing advice (gas.optimize).

Get recent DEX swap trades from a Uniswap V3 pool. Use for recent swaps in a known Uniswap V3 pool. It is pool-specific and read-only; use market.overview for a broad snapshot or defi.liquidity for pool state and depth.

Discover recently created Uniswap V3 pools and inspect token metadata. Returns an explicit unavailable result when the selected chain has no configured factory.

Get a cross-chain market snapshot: ETH price, gas costs, and DeFi TVL across Base, Ethereum, Arbitrum, and Optimism in one call. Use for a fixed broad snapshot of major market, gas, and TVL signals. It is not a chain health verdict, token price lookup, or custom chain comparison; use chain.health, token.price, or chain.compare for those questions.

Intent Solver decision intelligence. Provides profitability analysis, gas costs, competition level, and recommendations for ERC-7683 cross-chain intent execution. ($0.007) Use before evaluating an ERC-7683 cross-chain intent to compare gas, liquidity, competition, and estimated profitability. It does not execute the intent and should not be treated as a guaranteed quote; both source and destination must be supported EVM chains.

Monitor stablecoin peg stability. Detects USDC/USDT/DAI price deviations from $1.00 using on-chain DEX pool data.

Get USDC/USDT/DAI total supply across chains.

Monitor flash loan activity on Aave V3. Detects recent flash loans with amounts and premiums paid.

Monitor DeFi liquidation events on Aave V3. High liquidation counts indicate market stress and potential cascading risk.

Create a watch on an address. Returns a wallet snapshot and watchId; use watch-diff later to receive only changed fields. Use to create the first address snapshot in a stateful watch workflow. Save the returned watchId and call monitor.watch.diff in the same MCP session for later changes.

Get changes since the last check for a watched address. Returns changed fields and numeric deltas. Use only after monitor.watch.address has created a watchId in the same MCP session. It returns changes since the last check and advances the snapshot; create a new watch for a new address.

Monitor large token transfers (USDC, WETH) on EVM chains or large SOL transfers on Solana. Returns recent whale movements above a threshold.

Track a specific whale address with Address Intelligence labels and wallet profile.

Get NFT collection info: name, symbol, total supply, owner count. EVM chains only (ERC-721/1155).

Analyze NFT collection activity: recent transfers, mints, burns, unique buyers, and activity level from on-chain ERC721 events.

Analyze NFT holder distribution by scanning recent Transfer events.

Get individual NFT token metadata: owner, tokenURI, image, attributes. Resolves IPFS URIs. EVM chains only.

Data Oracle: Real-time health and block freshness across configured EVM chains. Detects chain outages, stale blocks, and RPC degradation before agents submit transactions.

Data Oracle: Multi-chain gas price aggregation. Returns gas prices across multiple chains with a cheapest-chain recommendation. Ideal for agents choosing settlement chains.

Data Oracle: Verified token price feed with Chain Proof signature. Returns price, source, and confidence level. Lightweight alternative to Chainlink for agent use cases.

Gas price prediction: EMA-based forecast for the next 5 minutes and 1 hour using accumulated readings.

Liquidity prediction: TVL trend analysis with health scoring, risk factors, and a 24-hour range.

Token momentum prediction: BUY, SELL, or HOLD signal based on price change and trending activity.

Whale activity prediction: projects next-hour transfer count and volume using a frequency decay model.

Read recent event logs from any smart contract. Auto-decodes Transfer, Approval, Swap events. EVM only.

Security scan a smart contract via bytecode analysis. Detects selfdestruct, delegatecall, proxy patterns, ownership. No external APIs. EVM only. Scope: bytecode-level inspection of one EVM contract for proxy, ownership, delegatecall, and selfdestruct signals. Use this for 'what does the deployed code expose?'. It is not a token market/liquidity assessment (token.risk), a wallet score, or a full audit, and it does not judge a trade by itself.

Check if an address is a smart contract or an EOA wallet. Returns code size, balance, and classification.

Quick sandwich attack detection. Analyzes 5 transactions before/after target in the same block. EVM only.

Cross-protocol spread analysis with chain-specific DEX names, cost estimates, and market microstructure data. This is a heuristic estimate, not real-time mempool data.

Pre-trade safety analysis. Evaluates sandwich attack risk, recommends optimal slippage, and suggests mitigations before executing on-chain trades. Every agent should call this before swapping. ($0.05) Scope: composite pre-trade decision for a proposed swap, bridge, or liquidity action, focused on MEV exposure and slippage mitigation. Use this before acting. It is not a historical sandwich scan (security.sandwich), a token due-diligence report (token.risk), or a transaction executor.

Batch scan an address's recent transactions for MEV sandwich attacks. Checks front-run + back-run patterns in surrounding transactions. Use to inspect historical sandwich patterns around an address. It is not a pre-trade protection decision; use security.mev.shield before a swap or liquidity action.

Check a wallet's ERC20 token approvals for security risks. Flags unlimited approvals and risky spender contracts.

Analyze top token holders by recent accumulation. Scans Transfer events to identify the largest net receivers of a token. Use for token-holder concentration and recent net accumulation. Do not use it for a wallet's portfolio or token price; use wallet.report for a wallet address or token.price for a token price.

Get real-time token price. EVM: reads Uniswap V3 TWAP on-chain. Solana: reads Pyth oracle price account directly from chain. No external API.

Analyze a token's risk profile. EVM: checks contract verification, proxy status, ownership renouncement, liquidity. Solana: checks mint/freeze authority, supply, Metaplex metadata. Scope: asset-level token due diligence for a token contract or mint, combining market, liquidity, verification, and control signals. Use this when the question is 'is this token safe or liquid?'. It is not raw bytecode inspection (use security.contract.scan), a wallet's financial behavior (use wallet.credit_score), or a multi-signal address dashboard (use analyze.risk_dashboard).

Screen tokens by risk score and price. Returns sorted list of tokens matching criteria. EVM only.

On-chain sentiment oracle for any token/chain. Derives market sentiment from 5 on-chain signals: gas trend, gas level, momentum, chain health, ecosystem trend. No LLM. ($0.012)

Get ERC20 token total supply, decimals, symbol, and name from on-chain data. Use for contract-level supply metadata such as total supply, decimals, symbol, and name. It does not assess price, token safety, or holder concentration; use token.risk, token.price, or token.holders instead.

Get trending tokens by on-chain transfer volume. EVM only — ranks tokens by Transfer event count in recent blocks.

Read token vesting/unlock schedule from on-chain contracts. Supports LinearVesting, CliffVesting, and Timelock patterns.

CaaS (Context as a Service): Aggregates real-time on-chain signals into a structured context brief for agent decision-making. Intents: swap (gas+price+whales), bridge (multi-chain gas), invest (yields+trending), monitor (whales+gas), general (all signals). No LLM cost — pure data. Use at the start of a swap, bridge, invest, monitor, or general workflow to collect the relevant signals in one structured brief. Use focused tools when the agent already knows the exact data it needs.

Resolve ENS domain names to Ethereum addresses (forward) or addresses to ENS names (reverse). Also retrieves text records.

Read on-chain DAO governance proposals. Shows last 5 proposals with vote counts and states. Supported: Ethereum, Arbitrum, Optimism.

Natural language intent routing: describe what you want to know and ChainRay selects a focused set of data services. Counts toward the client hourly MCP capacity policy; use the paid HTTP API for per-request settlement. Use when the agent has a natural-language data question and needs ChainRay to select a focused route. For deterministic workflows, call the specific tool directly; paid HTTP requests are separate from this MCP capacity policy.

Analyze a Gnosis Safe multi-sig wallet. Returns owners, threshold, nonce, modules, and security assessment.

Get connection info for ChainRay real-time SSE streaming endpoints. These endpoints require a direct HTTP connection with text/event-stream Accept header, not MCP. Use this tool to learn how to connect. Use to discover the five real-time SSE streams and their connection requirements. The returned guidance is not a stream itself; connect directly over HTTP with the documented Accept and payment headers.

Verify data integrity: pass a dataHash from any ChainRay response's _proof field to verify that the data was produced by ChainRay. Use after receiving a ChainRay response with _proof.dataHash to verify its integrity. It verifies a supplied hash and does not independently validate the underlying blockchain data.

Multi-agent workflow intelligence. Generates differentiated context briefs for each agent role in a collaborative workflow (swap, risk, bridge, settle, monitor, analysis agents). ($0.05)

Calculate an on-chain credit score (0-100) for any wallet. Factors: transaction history, native balance, token diversity, stablecoin holdings, DeFi activity. Returns grade (AAA to C). Scope: wallet-level financial behavior and activity score based on transaction history, balances, token diversity, stablecoins, and DeFi use. Use this for 'how active or creditworthy is this wallet?'. It is not Agent identity/reputation (agent.reputation), a registered card (agent.card.lookup), or token/contract risk.

Query the Address Intelligence database for labels on an address (whale, smart_money, etc). Labels are learned automatically from whale alerts and smart money tracking.

Analyze a wallet's portfolio: total USD value, token breakdown, concentration analysis, and diversification score.

Profile a wallet address. EVM: ETH balance, token count, activity labels (whale/active/dormant). Solana: SOL balance, SPL token holdings, activity classification.

Comprehensive address report combining wallet profile, credit score, token approvals, and recent interactions in one response.

Track smart money patterns by analyzing whale transfer activity. Identifies accumulation vs distribution behavior and market sentiment.