Arcadia Finance

Get a rebalancing recommendation for an Arcadia account: suggests asset changes to optimize yield. Uses 1d APY (not 7d like read_strategy_list), so recommended strategies may differ from the list ranking. APY values are decimal fractions (0.05 = 5%). weekly_earning_difference is in USD.

List all Arcadia accounts owned by a wallet address. Returns a summary of each account (address, name). Call read_account_info with a specific account_address for full details like health factor, collateral, and debt.

Check ERC20 token allowances for a spender address. Use before write_wallet_approve to avoid redundant approvals: skip approving if the current allowance is already sufficient.

Get native ETH and ERC20 token balances for a wallet address. Reads directly from chain via RPC multicall. Use before write_account_add_liquidity or write_account_deposit to verify the wallet has sufficient tokens. Returns both raw balance (smallest unit/wei) and formatted (human-readable) per token.

Get Arcadia points balance for a specific wallet address.

Multi-step flash-action: atomically combines [deposit from wallet] + [use account collateral] + [swap to optimal ratio] + [mint LP] + [borrow if leveraged] in ONE transaction. Do NOT call write_account_deposit separately. Capital sources: wallet tokens (deposits array), existing account collateral (use_account_assets=true), or both. Check allowances first (read_wallet_allowances), then approve if needed (write_wallet_approve). Supports depositing multiple tokens and minting multiple LP positions in one tx. Works with both margin accounts (can leverage) and spot accounts (no leverage). For work…

Upgrade one Arcadia account to Aero (MetadexCL V1) in one flashAction: every Slipstream V1/V2/V3 position (dex_protocol slipstream*, staked or not, see read_account_info) moves to the Aero CL pool with the same pair and variant at the same range and tick spacing (when Aero has no pool at that tick spacing, the user picks another one), and every unit of old AERO (loose, in rewards, in an old-AERO pair) becomes the new AERO. Returns the plan and, when anything can go now, the unsigned transaction. Only the account owner can sign it. The backend decides what moves: report items[].status and items…

Configure an account's automations from a list of intents and return the unsigned setAssetManagers transaction. The backend resolves which asset managers each intent needs, validates that the combination is compatible, encodes the metadata and builds the calldata, so you describe the desired outcome rather than the contracts. With mode 'save' (the default) the intents array is the complete desired state: the backend diffs it against what is currently enabled, so any automation you leave out is DISABLED by the returned transaction. Pass a single intent with enabled: false to turn everything of…

Apply an explicit change to an account's automations and return the unsigned setAssetManagers transaction. Unlike write_account_automations this is a delta, not a full desired state: automations you do not mention are left untouched. Use it to switch one automation on or off without restating the others. The enable array takes intents to switch on (same shapes as write_account_automations). To turn an automation OFF, call read_asset_manager_current, take the address of the manager serving it, and pass that address in the disable array: an intent with enabled: false in `enable` is rejected bec…

Build an unsigned transaction to borrow from an Arcadia lending pool against account collateral. NOT needed for leveraged LP: write_account_add_liquidity handles borrowing internally when leverage > 0. Only works with margin accounts (created with a creditor/lending pool). Spot accounts (no creditor) cannot borrow: the tool will validate this and reject. Before borrowing, verify the account has positive free margin via read_account_info: collateral_value must exceed used_margin.

Atomic flash-action that closes an Arcadia account position in ONE transaction. Combines up to 3 steps atomically: [burn LP position] + [swap all tokens to a single target asset] + [repay debt]. Tokens remain in the account after closing: use write_account_withdraw to send them to your wallet. ALWAYS try this tool first when closing/exiting a position. Only fall back to individual tools (write_account_remove_liquidity, write_account_swap, write_account_deleverage, write_account_withdraw) if this tool fails. Supports two modes: - close_lp_only=true: Burns LP and leaves underlying tokens in th…

Build an unsigned transaction to create a new Arcadia account via the Factory contract. account_version: 3 with creditor → V3 margin account (can borrow/leverage). account_version: 0 or 4 → V4 spot account (no borrowing, creditor is ignored, any ERC20 allowed). Returns the predicted account address (deterministic via CREATE2).

Multi-step flash-action: sells account collateral to the debt token and repays in one atomic transaction: no wallet tokens needed. To repay from wallet tokens instead, use write_account_repay. NOTE: If you are closing a position (remove LP + swap + repay + withdraw), prefer write_account_close which batches everything atomically. Only use this tool for standalone repayment while keeping the position active. The returned calldata is time-sensitive: sign and broadcast within 30 seconds. If the transaction reverts due to price movement, rebuild and sign again immediately (retry at least once befo…

Build an unsigned transaction to deposit assets into an Arcadia account as collateral. Supports ERC20 tokens and ERC721 NFTs (LP positions). NOT needed before write_account_add_liquidity: that tool deposits from wallet atomically. Ensure the account is approved first (call read_wallet_allowances to check, then write_wallet_approve if needed). Account version is auto-detected on-chain (override with account_version if needed).

Flash-action: PARTIALLY decreases liquidity from an LP position. The position remains open with reduced liquidity; underlying tokens stay in the account. For FULL position exit (burn LP + swap + repay + withdraw), use write_account_close instead: it batches everything into one atomic transaction. The returned calldata is time-sensitive — sign and broadcast within 30 seconds. If the transaction reverts due to price movement, rebuild and sign again immediately (retry at least once before giving up). Response includes tenderly_sim_url and tenderly_sim_status for pre-broadcast validation.

Repay debt to an Arcadia lending pool using tokens from the wallet (requires ERC20 allowance). To repay using account collateral instead (no wallet tokens needed), use write_account_deleverage. Check allowance first (read_wallet_allowances), then approve the pool if needed (write_wallet_approve). Check outstanding debt with read_account_info.

Flash-action: stake, unstake, or claim rewards for an LP position in one atomic transaction. Use the `action` parameter to select the operation. `asset_address` is the position manager contract: pass the non-staked PM address when staking, or the staked PM address when unstaking. The returned calldata is time-sensitive, sign and broadcast within 30 seconds. If the transaction reverts due to price movement, rebuild and sign again immediately (retry at least once before giving up). Tenderly simulation may not be available for this endpoint. Verify the position exists with read_account_info befor…

Flash-action: swaps assets within an Arcadia account in one atomic transaction. The backend finds the optimal swap route. NOTE: If you are closing a position (swap + repay + withdraw), prefer write_account_close which batches everything atomically. Only use this tool for standalone swaps within an active position. The returned calldata is time-sensitive: sign and broadcast within 30 seconds. If the transaction reverts due to price movement, rebuild and sign again immediately (retry at least once before giving up). Response includes tenderly_sim_url and tenderly_sim_status for pre-broadcast val…

Build an unsigned transaction to withdraw assets from an Arcadia account to the owner's wallet. Only the account owner can withdraw. Will revert if the account has debt and withdrawal would make it undercollateralized. Does not support max_uint256: pass exact amounts from read_account_info. Account version is auto-detected on-chain (override with account_version if needed).

Build an unsigned deposit transaction into an Arcadia lending tranche (ERC-4626). Lenders deposit the pool's underlying asset (USDC/WETH/cbBTC) and receive tranche shares that accrue interest from borrowers. Requires prior ERC-20 approval to the tranche (see write_wallet_approve). To check current lender yield, call read_pool_list or read_pool_info.

Build an unsigned redeem transaction to withdraw from an Arcadia lending tranche (ERC-4626). Burns tranche shares and returns the corresponding amount of underlying asset, including accrued interest. The owner must be the shares holder; receiver is where the underlying asset is sent.

Build an unsigned approval transaction. For ERC20 tokens: generates approve(spender, amount). For ERC721/ERC1155 NFTs (e.g. LP positions): generates setApprovalForAll(operator, true). Required before write_account_deposit or write_account_add_liquidity (when depositing from wallet). Tip: call read_wallet_allowances first to check if approval already exists: skip this if the current allowance is sufficient.

Upgrade VELO held in a wallet on Optimism to the new AERO on Base: ordered unsigned wallet transactions from owner_address, an approve when the allowance is short, then depositLiquid on the Velodrome migration with the Hyperlane fee as value. 0.044 new AERO per VELO arrives at the same address on Base once the message lands. VELO inside an Arcadia account must be withdrawn to the wallet first (write_account_withdraw). VELO stays usable, so this is optional. Optimism (chain_id 10) only. 'upgrade unavailable' names the contract's reason: not_open (with the opening time), paused, budget_exhausted…